Disable tests in cuda rdc PT build already failing in non-rdc build (#4502) #4825

bartlettroscoe · 2019-04-06T00:06:31Z

This disables tests already failing in the matching non-RDC build so those failures have nothing to do with RDC (see #4502). This will allow us to promote this build to the "ATDM" group and maintain it. This build is too expensive to run as a Trilinos PR build so the next best thing is to run it as a nightly build.

Disables ROL tests from ROL tests failing in targeted CUDA PR build Trilinos-atdm-white-ride-cuda-9.2-release-debug-pt #3543
Disables TrilinosCouplings tests from TrilinosCouplings build and test failures in the build Trilinos-atdm-white-ride-cuda-9.2-release-debug-pt starting 2018-10-24 #3749
Disables Zoltan tests from Zoltan test diff failures in targeted CUDA PR build Trilinos-atdm-white-ride-cuda-9.2-release-debug-pt #4042

How this was tested

I tested this on 'ride' with:

$ cd /home/rabartl/Trilinos.base/BUILDS/RIDE/CHECKIN/

$ ./checkin-test-atdm.sh \
     cuda-9.2-gnu-7.2.0-rdc-release-debug-pt \
     --enable-all-packages=on --configure

which showed the disables:

$ grep _DISABLE cuda-9.2-gnu-7.2.0-rdc-release-debug-pt/configure.out
...
-- Zoltan_ch_ewgt_zoltan_parallel: NOT added test because Zoltan_ch_ewgt_zoltan_parallel_DISABLE='ON'!
-- Zoltan_ch_grid20x19_zoltan_parallel: NOT added test because Zoltan_ch_grid20x19_zoltan_parallel_DISABLE='ON'!
-- Zoltan_ch_nograph_zoltan_parallel: NOT added test because Zoltan_ch_nograph_zoltan_parallel_DISABLE='ON'!
-- Zoltan_ch_simple_zoltan_parallel: NOT added test because Zoltan_ch_simple_zoltan_parallel_DISABLE='ON'!
...
-- ROL_test_elementwise_TpetraMultiVector_MPI_4: NOT added test because ROL_test_elementwise_TpetraMultiVector_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_0ld_poisson_example_01_MPI_4: NOT added test because ROL_example_PDE-OPT_0ld_poisson_example_01_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_0ld_stefan-boltzmann_example_03_MPI_4: NOT added test because ROL_example_PDE-OPT_0ld_stefan-boltzmann_example_03_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_0ld_adv-diff-react_example_01_MPI_4: NOT added test because ROL_example_PDE-OPT_0ld_adv-diff-react_example_01_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_0ld_adv-diff-react_example_02_MPI_4: NOT added test because ROL_example_PDE-OPT_0ld_adv-diff-react_example_02_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_stefan-boltzmann_example_01_MPI_4: NOT added test because ROL_example_PDE-OPT_stefan-boltzmann_example_01_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_stefan-boltzmann_example_03_MPI_4: NOT added test because ROL_example_PDE-OPT_stefan-boltzmann_example_03_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_navier-stokes_example_01_MPI_4: NOT added test because ROL_example_PDE-OPT_navier-stokes_example_01_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_navier-stokes_example_02_MPI_4: NOT added test because ROL_example_PDE-OPT_navier-stokes_example_02_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_obstacle_example_01_MPI_4: NOT added test because ROL_example_PDE-OPT_obstacle_example_01_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_nonlinear-elliptic_example_01_MPI_4: NOT added test because ROL_example_PDE-OPT_nonlinear-elliptic_example_01_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_nonlinear-elliptic_example_02_MPI_4: NOT added test because ROL_example_PDE-OPT_nonlinear-elliptic_example_02_MPI_4_DISABLE='ON'!
-- ROL_example_PDE-OPT_topo-opt_poisson_example_01_MPI_4: NOT added test because ROL_example_PDE-OPT_topo-opt_poisson_example_01_MPI_4_DISABLE='ON'!
...
-- TrilinosCouplings_Example_Maxwell_MueLu_MPI_1: NOT added test because TrilinosCouplings_Example_Maxwell_MueLu_MPI_1_DISABLE='ON'!
-- TrilinosCouplings_Example_Maxwell_MueLu_MPI_4: NOT added test because TrilinosCouplings_Example_Maxwell_MueLu_MPI_4_DISABLE='ON'!

trilinos-autotester · 2019-04-06T00:08:19Z

Status Flag 'Pre-Test Inspection' - Auto Inspected - Inspection Is Not Necessary for this Pull Request.

…rilinos#4502) This disables tests already failing in the matching non-RDC build so those failures have nothing to do with RDC. This will allow us to promote this build to the "ATDM" group and maintain it. This build is too expensive to run as a Trilinos PR build so the next best thing is to run it as a nightly build. * Disables ROL tests from trilinos#3543 * Disables TrilinosCouplings tests from trilinos#3749 * Disables Zoltan tests from trilinos#4042

trilinos-autotester · 2019-04-06T00:09:11Z

Status Flag 'Pull Request AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 3158
Status: STARTED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`dfd8863`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 2987
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`dfd8863`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 1434
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`dfd8863`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 1148
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`dfd8863`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 849
Status: STARTED

Jenkins Parameters

Parameter Name	Value
JENKINS_JOB_TYPE	Experimental
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`dfd8863`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Using Repos:

Repo: TRILINOS (bartlettroscoe/Trilinos)

Pull Request Author: bartlettroscoe

trilinos-autotester · 2019-04-06T00:12:49Z

Status Flag 'Pull Request AutoTester' - Error: Jenkins Jobs - A user has commited a change to the PR before testing completed. The original testing SHA = dfd8863 Does not match the current commit SHA = 5eca66f. The Jenkins Jobs will be shutdown; Testing of this PR must occur again.

trilinos-autotester · 2019-04-06T00:12:55Z

Status Flag 'Pull Request AutoTester' - Jenkins Testing: 1 or more Jobs FAILED

Note: Testing will normally be attempted again in approx. 2 Hrs 30 Mins. If a change to the PR source branch occurs, the testing will be attempted again on next available autotester run.

Pull Request Auto Testing has FAILED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 3158
Status: ERROR

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`dfd8863`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 2987
Status: ERROR

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`dfd8863`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 1434
Status: ERROR

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`dfd8863`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 1148
Status: ERROR

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`dfd8863`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 849
Status: ERROR

Jenkins Parameters

Parameter Name	Value
JENKINS_JOB_TYPE	Experimental
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`dfd8863`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.8.4 # 3158 (click to expand)


  1) sems-env
  2) sems-git/2.10.1
  3) sems-gcc/4.8.4
  4) sems-openmpi/1.10.1
  5) sems-python/2.7.9
  6) sems-boost/1.63.0/base
  7) sems-zlib/1.2.8/base
  8) sems-hdf5/1.8.12/parallel
  9) sems-netcdf/4.4.1/exo_parallel
 10) sems-parmetis/4.0.3/parallel
 11) sems-scotch/6.0.3/nopthread_64bit_parallel
 12) sems-superlu/4.3/base
 13) sems-cmake/3.10.3
 14) atdm-env
 15) atdm-ninja_fortran/1.7.2
MPI type = sems-openmpi/1.10.1
PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request
CDash Track = Pull Request
pwd: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
+ env TRILINOS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos TRILINOS_SCRIPTS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/commonTools/framework/get-changed-trilinos-packages.sh origin/develop HEAD packageEnables.cmake

*** Generating set of Trilinos enables given modified packages from

*** git commit origin/develop to HEAD

TRILINOS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

TRILINOS_SCRIPTS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

TRIBITS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/tribits
A) Generate the Trilinos Packages definition and depencencies XML file
Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST=''
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST=''
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

set +x

Enabled packages:

-- NOTE: No packages are being enabled!

Set CWD = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype

Build name               = PR-4825-test-Trilinos_pullrequest_gcc_4.8.4-3158

Cur dir                  = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

Binary dir               = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/pull_request_test

Parallel level           = 21

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = OFF

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxGCC4.8.4TestingSettings.cmake"

-C "/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-G "Ninja"

/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-3.novalocal&field2=buildname&compare2=61&value2=PR-4825-test-Trilinos_pullrequest_gcc_4.8.4-3158&field3=buildstamp&compare3=61&value3=20190406-0009-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-4825-test-Trilinos_pullrequest_gcc_4.8.4-3158&field2=buildstamp&compare2=61&value2=20190406-0009-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-4825-test-Trilinos_pullrequest_gcc_4.8.4-3158&field2=buildstamp&compare2=61&value2=20190406-0009-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

............................ Size of output: 27K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

. Size of output: 0K

Build succeeded.

build submit error = 0

Starting testing step.

No tests were found!!!

Tests succeeded.

test submit error = 0

File upload submit error = 0

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_intel_17.0.1 # 2987 (click to expand)


  3) sems-gcc/4.9.3
  4) sems-intel/17.0.1
  5) sems-mpich/3.2
  6) sems-python/2.7.9
  7) sems-boost/1.63.0/base
  8) sems-zlib/1.2.8/base
  9) sems-hdf5/1.8.12/parallel
 10) sems-netcdf/4.4.1/exo_parallel
 11) sems-parmetis/4.0.3/parallel
 12) sems-scotch/6.0.3/nopthread_64bit_parallel
 13) sems-superlu/4.3/base
 14) sems-cmake/3.10.3
 15) atdm-env
 16) atdm-cmake/3.11.1
 17) atdm-ninja_fortran/1.7.2
MPI type = sems-mpich/3.2
PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request
CDash Track = Pull Request
pwd: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1
+ env TRILINOS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos TRILINOS_SCRIPTS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/commonTools/framework/get-changed-trilinos-packages.sh origin/develop HEAD packageEnables.cmake

*** Generating set of Trilinos enables given modified packages from

*** git commit origin/develop to HEAD

TRILINOS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos

TRILINOS_SCRIPTS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos

TRIBITS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/tribits
A) Generate the Trilinos Packages definition and depencencies XML file
Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST=''
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST=''
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

set +x

Enabled packages:

-- NOTE: No packages are being enabled!

Set CWD = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/TFW_testing_single_configure_prototype

Build name               = PR-4825-test-Trilinos_pullrequest_intel_17.0.1-2987

Cur dir                  = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos

Binary dir               = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/pull_request_test

Parallel level           = 21

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = OFF

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/atdm/binary-install/cmake-3.11.1-Linux-x86_64/bin/cmake

-C "/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxIntelTestingSettings.cmake"

-C "/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-G "Ninja"

/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic143&field2=buildname&compare2=61&value2=PR-4825-test-Trilinos_pullrequest_intel_17.0.1-2987&field3=buildstamp&compare3=61&value3=20190406-0009-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-4825-test-Trilinos_pullrequest_intel_17.0.1-2987&field2=buildstamp&compare2=61&value2=20190406-0009-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-4825-test-Trilinos_pullrequest_intel_17.0.1-2987&field2=buildstamp&compare2=61&value2=20190406-0009-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

............................ Size of output: 27K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

. Size of output: 0K

Build succeeded.

build submit error = 0

Starting testing step.

No tests were found!!!

Tests succeeded.

test submit error = 0

File upload submit error = 0

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.9.3_SERIAL # 1434 (click to expand)


drwxrwxr-x.  3 trilinos trilinos 4096 Apr  5 18:09 TFW_single_configure_support_scripts
drwxrwxr-x.  5 trilinos trilinos 4096 Apr  5 18:09 .
drwxrwxr-x.  3 trilinos trilinos 4096 Apr  5 18:09 TFW_testing_single_configure_prototype
ModuleCmd_Load.c(213):ERROR:105: Unable to locate a modulefile for 'atdm-cmake/3.11.1'
cmake version 3.10.3
CMake suite maintained and supported by Kitware (kitware.com/cmake).

Currently Loaded Modulefiles:

sems-env                   8) sems-netcdf/4.4.1/exo
sems-git/2.10.1            9) sems-metis/5.1.0/base
sems-gcc/4.9.3            10) sems-superlu/4.3/base
sems-python/2.7.9         11) sems-cmake/3.10.3
sems-boost/1.63.0/base    12) atdm-env
sems-zlib/1.2.8/base      13) atdm-ninja_fortran/1.7.2
sems-hdf5/1.8.12/base

Job is SERIAL

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

CDash Track = Pull Request

pwd: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL


env TRILINOS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos TRILINOS_SCRIPTS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/commonTools/framework/get-changed-trilinos-packages.sh origin/develop HEAD packageEnables.cmake


*** Generating set of Trilinos enables given modified packages from

*** git commit origin/develop to HEAD

TRILINOS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

TRILINOS_SCRIPTS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

TRIBITS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/tribits
A) Generate the Trilinos Packages definition and depencencies XML file
Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST=''
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST=''
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

set +x

Enabled packages:

-- NOTE: No packages are being enabled!

Set CWD = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype

Build name               = PR-4825-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-1434

Cur dir                  = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

Binary dir               = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/pull_request_test

Parallel level           = 21

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = OFF

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxGCC4.9.3TestingSettingsSERIAL.cmake"

-C "/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-G "Ninja"

/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-1.novalocal&field2=buildname&compare2=61&value2=PR-4825-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-1434&field3=buildstamp&compare3=61&value3=20190406-0010-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-4825-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-1434&field2=buildstamp&compare2=61&value2=20190406-0010-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-4825-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-1434&field2=buildstamp&compare2=61&value2=20190406-0010-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

.......................... Size of output: 25K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

. Size of output: 0K

Build succeeded.

build submit error = 0

Starting testing step.

No tests were found!!!

Tests succeeded.

test submit error = 0

File upload submit error = 0

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0 # 1148 (click to expand)


  1) sems-env
  2) sems-git/2.10.1
  3) sems-gcc/7.2.0
  4) sems-openmpi/1.10.1
  5) sems-python/2.7.9
  6) sems-boost/1.63.0/base
  7) sems-zlib/1.2.8/base
  8) sems-hdf5/1.8.12/parallel
  9) sems-netcdf/4.4.1/exo_parallel
 10) sems-parmetis/4.0.3/parallel
 11) sems-scotch/6.0.3/nopthread_64bit_parallel
 12) sems-superlu/4.3/base
 13) sems-cmake/3.10.3
 14) atdm-env
 15) atdm-ninja_fortran/1.7.2
MPI type = sems-openmpi/1.10.1
PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request
CDash Track = Pull Request
pwd: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
+ env TRILINOS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos TRILINOS_SCRIPTS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/commonTools/framework/get-changed-trilinos-packages.sh origin/develop HEAD packageEnables.cmake

*** Generating set of Trilinos enables given modified packages from

*** git commit origin/develop to HEAD

TRILINOS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

TRILINOS_SCRIPTS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

TRIBITS_DIR=/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/tribits
A) Generate the Trilinos Packages definition and depencencies XML file
Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST=''
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST=''
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

set +x

Enabled packages:

-- NOTE: No packages are being enabled!

Set CWD = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/TFW_testing_single_configure_prototype

Build name               = PR-4825-test-Trilinos_pullrequest_gcc_7.2.0-1148

Cur dir                  = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

Binary dir               = /scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/pull_request_test

Parallel level           = 21

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = OFF

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxGCC7.2.0TestingSettings.cmake"

-C "/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-G "Ninja"

/scratch/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-4.novalocal&field2=buildname&compare2=61&value2=PR-4825-test-Trilinos_pullrequest_gcc_7.2.0-1148&field3=buildstamp&compare3=61&value3=20190406-0010-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-4825-test-Trilinos_pullrequest_gcc_7.2.0-1148&field2=buildstamp&compare2=61&value2=20190406-0010-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-4825-test-Trilinos_pullrequest_gcc_7.2.0-1148&field2=buildstamp&compare2=61&value2=20190406-0010-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

............................ Size of output: 27K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

. Size of output: 0K

Build succeeded.

build submit error = 0

Starting testing step.

No tests were found!!!

Tests succeeded.

test submit error = 0

File upload submit error = 0

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_cuda_9.2 # 849 (click to expand)


  8) pnetcdf-exo/1.9.0/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
  9) zlib/1.2.8
 10) hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
 11) netcdf/4.6.1/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
 12) cgns/20180521/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
 13) netlib/3.8.0/ibm/xl/16.1.0
 14) netlib/3.8.0/gcc/7.2.0
 15) superlu/4.3.0/gcc/7.2.0
 16) boost/1.65.1/gcc/7.2.0
 17) metis/5.0.1/gcc/7.2.0
 18) parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
 19) cmake/3.9.6
 20) valgrind/3.12.0
 21) devpack/20180521/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
Job is CUDA
MPI type = sems-openmpi/2.1.2
PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request
CDash Track = Pull Request
pwd: /home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3
+ env TRILINOS_DIR=/home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos TRILINOS_SCRIPTS_DIR=/home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos /home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/commonTools/framework/get-changed-trilinos-packages.sh origin/develop HEAD packageEnables.cmake

*** Generating set of Trilinos enables given modified packages from

*** git commit origin/develop to HEAD

TRILINOS_DIR=/home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos

TRILINOS_SCRIPTS_DIR=/home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos

TRIBITS_DIR=/home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/cmake/tribits
A) Generate the Trilinos Packages definition and depencencies XML file
Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos
git diff --name-only origin/develop..HEAD > /home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST=''
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST=''
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

set +x

Enabled packages:

-- NOTE: No packages are being enabled!

Set CWD = /home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/TFW_testing_single_configure_prototype

Build name               = PR-4825-test-Trilinos_pullrequest_cuda_9.2-849

Cur dir                  = /home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/TFW_testing_single_configure_prototype

Source dir               = /home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos

Binary dir               = /home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/pull_request_test

Parallel level           = 64

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = OFF

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/home/rabartl/install/white-ride/cmake-3.11.2/bin/cmake

-C "/home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/cmake/std/PullRequestLinuxCuda9.2TestingSettings.cmake"

-C "/home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-G "Ninja"

/home/trilinos/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ride11&field2=buildname&compare2=61&value2=PR-4825-test-Trilinos_pullrequest_cuda_9.2-849&field3=buildstamp&compare3=61&value3=20190406-0010-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-4825-test-Trilinos_pullrequest_cuda_9.2-849&field2=buildstamp&compare2=61&value2=20190406-0010-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-4825-test-Trilinos_pullrequest_cuda_9.2-849&field2=buildstamp&compare2=61&value2=20190406-0010-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................... Size of output: 20K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

. Size of output: 0K

Build succeeded.

build submit error = 0

Starting testing step.

No tests were found!!!

Tests succeeded.

test submit error = 0

File upload submit error = 0

Archiving artifacts

Finished: SUCCESS

CDash Test Results for PR# 4825.

Wiki: How to Reproduce PR Testing Builds and Errors.

trilinos-autotester · 2019-04-06T00:38:16Z

Status Flag 'Pre-Test Inspection' - Auto Inspected - Inspection Is Not Necessary for this Pull Request.

trilinos-autotester · 2019-04-06T00:39:07Z

Status Flag 'Pull Request AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 3159
Status: STARTED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`5eca66f`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 2988
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`5eca66f`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 1435
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`5eca66f`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 1149
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`5eca66f`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 850
Status: STARTED

Jenkins Parameters

Parameter Name	Value
JENKINS_JOB_TYPE	Experimental
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`5eca66f`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Using Repos:

Repo: TRILINOS (bartlettroscoe/Trilinos)

Pull Request Author: bartlettroscoe

trilinos-autotester · 2019-04-06T00:41:37Z

Status Flag 'Pull Request AutoTester' - Jenkins Testing: all Jobs PASSED

Pull Request Auto Testing has PASSED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 3159
Status: PASSED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`5eca66f`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 2988
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`5eca66f`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 1435
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`5eca66f`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 1149
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`5eca66f`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 850
Status: PASSED

Jenkins Parameters

Parameter Name	Value
JENKINS_JOB_TYPE	Experimental
PULLREQUESTNUM	4825
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	4502-cuda-rdc-pt-disable-tests
TRILINOS_SOURCE_REPO	https://github.com/bartlettroscoe/Trilinos
TRILINOS_SOURCE_SHA	`5eca66f`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`4867628`

CDash Test Results for PR# 4825.

trilinos-autotester · 2019-04-06T00:41:54Z

Status Flag 'Pre-Merge Inspection' - - This Pull Request Requires Inspection... The code must be inspected by a member of the Team before Testing/Merging
NO REVIEWS HAVE BEEN PERFORMED ON THIS PULL REQUEST!

trilinos-autotester · 2019-04-06T00:42:01Z

All Jobs Finished; status = PASSED, However Inspection must be performed before merge can occur...

trilinos-autotester · 2019-04-06T17:40:12Z

Status Flag 'Pre-Merge Inspection' - SUCCESS: The last commit to this Pull Request has been INSPECTED AND APPROVED by [ mhoemmen ]!

trilinos-autotester · 2019-04-06T17:40:19Z

Status Flag 'Pull Request AutoTester' - Pull Request will be Automerged

trilinos-autotester · 2019-04-06T17:40:23Z

Merge on Pull Request# 4825: IS A SUCCESS - Pull Request successfully merged

bartlettroscoe requested review from mhoemmen and fryeguy52 April 6, 2019 00:06

bartlettroscoe added the type: bug The primary issue is a bug in Trilinos code or tests label Apr 6, 2019

bartlettroscoe force-pushed the 4502-cuda-rdc-pt-disable-tests branch from dfd8863 to 5eca66f Compare April 6, 2019 00:11

mhoemmen approved these changes Apr 6, 2019

View reviewed changes

trilinos-autotester merged commit ce17247 into trilinos:develop Apr 6, 2019

trilinos-autotester removed the AT: AUTOMERGE Causes the PR autotester to automatically merge the PR branch once approvals are completed label Apr 6, 2019

bartlettroscoe mentioned this pull request Oct 20, 2019

Several ROL_example_PDE-OPT_XXX tests failing and timing out in 'waterman' CUDA builds starting 2019-10-17 #6124

Closed

trilinos-autotester mentioned this pull request Jul 9, 2020

Fixed wording of 2 comments. #7655

Merged

trilinos-autotester mentioned this pull request Apr 19, 2022

belos: add missing parameter to getValidParameters in GmresPolySolMgr #10444

Merged

Disable tests in cuda rdc PT build already failing in non-rdc build (#4502) #4825

Disable tests in cuda rdc PT build already failing in non-rdc build (#4502) #4825

Conversation

bartlettroscoe commented Apr 6, 2019 • edited Loading

How this was tested

trilinos-autotester commented Apr 6, 2019

trilinos-autotester commented Apr 6, 2019

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Jenkins Parameters

Using Repos:

trilinos-autotester commented Apr 6, 2019

trilinos-autotester commented Apr 6, 2019

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Jenkins Parameters

trilinos-autotester commented Apr 6, 2019

trilinos-autotester commented Apr 6, 2019

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Jenkins Parameters

Using Repos:

trilinos-autotester commented Apr 6, 2019

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Jenkins Parameters

trilinos-autotester commented Apr 6, 2019

trilinos-autotester commented Apr 6, 2019

trilinos-autotester commented Apr 6, 2019

trilinos-autotester commented Apr 6, 2019

trilinos-autotester commented Apr 6, 2019

bartlettroscoe commented Apr 6, 2019 •

edited

Loading