New Driver script and intel config file for PR testing

cmake/std/PullRequestLinuxDriver.sh

@@ -0,0 +1,203 @@
+#!/bin/env bash
+
+export https_proxy=https://wwwproxy.sandia.gov:80
+export http_proxy=http://wwwproxy.sandia.gov:80
+
+whoami
+which -a env
+
+## Rather than do proper option handling right now I am just going to
+##  test that all these environment variables are set.  Because getopt ;->
+: ${TRILINOS_SOURCE_REPO:?}
+: ${TRILINOS_SOURCE_BRANCH:?}
+: ${TRILINOS_TARGET_REPO:?}
+: ${TRILINOS_TARGET_BRANCH:?}
+: ${TRILINOS_SOURCE_SHA:?}
+: ${PULLREQUESTNUM:?}
+: ${JOB_BASE_NAME:?}
+: ${BUILD_NUMBER:?}
+
+source /projects/sems/modulefiles/utils/sems-modules-init.sh
+
+declare -i ierror=0
+#Have to keep loading git
+module load sems-git/2.10.1
+
+ls
+cd Trilinos
+
+#------------------------------
+# Doing merge of pull request
+#------------------------------
+
+
+# Check for existence of source_remote and remove if it exists
+git_remote_text=`git remote -v | grep "source_remote"`
+if [[ "$git_remote_text" != "" ]]; then
+  echo "git remote exists, removing it."
+  git remote rm source_remote
+fi
+
+#Add the necessary remote
+git remote add source_remote ${TRILINOS_SOURCE_REPO:?}
+ierror=$?
+if [[ $ierror != 0 ]]; then
+echo "There was a problem adding the remote for the source repo. The error code was: $ierror"
+#just in case somehow a previously defined source_remote caused this failure
+#would be better to check prior to the add. Don't want to issue command that will be known to fail typically.
+#git remote rm source_remote
+exit $ierror
+fi
+
+git fetch source_remote
+ierror=$?
+if [[ $ierror != 0 ]]; then
+echo "Source remote fetch failed. The error code was: $ierror"
+#git remote rm source_remote
+exit $ierror
+fi
+
+git remote -v
+
+git merge source_remote/${TRILINOS_SOURCE_BRANCH:?}
+ierror=$?
+if [[ $ierror != 0 ]]; then
+echo "There was an issue merging changes from ${TRILINOS_SOURCE_REPO:?} ${TRILINOS_SOURCE_BRANCH:?} onto ${TRILINOS_TARGET_REPO:?} ${TRILINOS_TARGET_BRANCH:?}. The error code was: $ierror"
+#git remote rm source_remote
+exit $ierror
+fi
+
+#Need to compare expected SOURCE SHA to actual SHA! This will prevent a security hole.
+#first get the most recent SHA on the source branch
+declare source_sha=$(git rev-parse source_remote/${TRILINOS_SOURCE_BRANCH:?})
+echo "The most recent SHA for repo: ${TRILINOS_SOURCE_REPO:?} on branch: ${TRILINOS_SOURCE_BRANCH:?} is: $source_sha"
+#Now see if the two shas match, unless TRILINOS_SOURCE_SHA is the default value of ABC
+if [[ ABC != ${TRILINOS_SOURCE_SHA:?} ]]; then
+  if [[ $source_sha != ${TRILINOS_SOURCE_SHA:?} ]]; then
+    echo "The SHA ($source_sha) for the last commit on branch ${TRILINOS_SOURCE_BRANCH:?} in repo ${TRILINOS_SOURCE_REPO:?} is different than the expected SHA, which is: ${TRILINOS_SOURCE_SHA:?}. The error code was: $ierror"
+    #git remote rm source_remote
+  exit -1
+  fi
+fi
+
+# may eventually want to verify the same target SHA too, but there would be
+# advantages to testing newer versions of target instead of older if
+# not all test jobs kick off right away
+
+#------------------------------
+# Doing setup for build
+#------------------------------
+
+
+git status
+git diff origin/${TRILINOS_TARGET_BRANCH:?} --numstat > ../gitchanges.txt
+ierror=$?
+if [[ $ierror != 0 ]]; then
+echo "There was an issue getting the list of changed files. The error code was: $ierror"
+
+exit $ierror
+fi
+
+cd ../
+#process list of changes here with script and save to 'packageEnables'
+declare packageEnables=$(bash Trilinos/commonTools/test/utilities/changedPackages.bash)
+ierror=$?
+if [[ $ierror != 0 ]]; then
+echo "There was an issue creating the list of package enables. The error code was: $ierror"
+exit $ierror
+fi
+echo "List of package enables is: $packageEnables"
+
+# Set up the full environment for the build
+if [ "Trilinos_pullrequest_gcc_4.8.4" == "${JOB_BASE_NAME:?}" ]
+then
+  source Trilinos/cmake/std/sems/PullRequestGCC4.8.4TestingEnv.sh
+  ierror=$?
+  if [[ $ierror != 0 ]]; then
+    echo "There was an issue loading the gcc environment. The error code was: $ierror"
+    exit $ierror
+  fi
+elif [ "Trilinos_pullrequest_gcc_4.9.3" == "${JOB_BASE_NAME:?}" ]
+then
+  source Trilinos/cmake/std/sems/PullRequestGCC4.9.3TestingEnv.sh
+  ierror=$?
+  if [[ $ierror != 0 ]]; then
+    echo "There was an issue loading the gcc environment. The error code was: $ierror"
+    exit $ierror
+  fi
+elif [ "Trilinos_pullrequest_intel_17.0.1" == "${JOB_BASE_NAME:?}" ]
+then
+  source Trilinos/cmake/std/sems/PullRequestIntel17.0.1TestingEnv.sh
+  ierror=$?
+  if [[ $ierror != 0 ]]; then
+    echo "There was an issue loading the intel environment. The error code was: $ierror"
+    exit $ierror
+  fi
+else
+  ierror=42
+  echo "There was an issue loading the proper environment. The error code was: $ierror"
+  exit $ierror
+fi
+
+#load a newer cmake. The single submit requires at least 3.10.*
+module unload sems-cmake
+export PATH=/ascldap/users/bmpersc/bin/cmake-3.10.2/bin:$PATH
+cmake --version
+
+module list
+
+echo "MPI type = sems-${SEMS_MPI_NAME:?}/${SEMS_MPI_VERSION:?}"
+
+# CDASH_TRACK="Pull Request"
+CDASH_TRACK="Experimental"
+echo "CDash Track = ${CDASH_TRACK:?}"
+
+
+#-------------------------------------
+# Doing configure/build/test/submit
+#-------------------------------------
+echo $packageEnables | sed -e "s/-D\([^= ]*\)=\([^ ]*\)/set(\1 \2 CACHE BOOL \"Enabled by PR package enable file.\")^/g" | tr "^" "\n" > packageEnables.cmake
+
+build_name="PR-$PULLREQUESTNUM-test-$JOB_BASE_NAME-$BUILD_NUMBER"
+
+#This should be runnable from anywhere, but all the tests so far have been from the 
+#same dir the simple_testing.cmake file was in.
+cd TFW_testing_single_configure_prototype
+
+if [ "icc" == ${CC:?} ]
+then
+  CONFIG_SCRIPT=PullRequestLinuxIntelTestingSettings.cmake
+else
+  CONFIG_SCRIPT=PullRequestLinuxGCCTestingSettings.cmake
+fi
+
+ctest -S simple_testing.cmake \
+  -Dbuild_name=${build_name:?} \
+  -Dskip_by_parts_submit=OFF \
+  -Dskip_update_step=ON \
+  -Ddashboard_model=Experimental \
+  -Ddashboard_track="${CDASH_TRACK:?}" \
+  -DPARALLEL_LEVEL=13 \
+  -Dbuild_dir="$WORKSPACE/pull_request_test" \
+  -Dconfigure_script=../Trilinos/cmake/std/${CONFIG_SCRIPT:?} \
+  -Dpackage_enables=../packageEnables.cmake \
+  -Dsubprojects_file=../TFW_single_configure_support_scripts/package_subproject_list.cmake
+
+ierror=$?
+
+if [[ $ierror != 0 ]]; then
+echo "Single configure/build/test failed. The error code was: $ierror"
+exit $ierror
+fi
+
+
+ierror=$?
+if [[ $ierror != 0 ]]; then
+echo "There was an error removing the source remote. The error code was: $ierror"
+exit $ierror
+fi
+
+#NEED TO MAKE SURE THE REPOS ARE CLEAN FOR NEW PULL REQUESTS!
+
+#pushd Trilinos/cmake/ctest/drivers/parameterized
+#ctest -S ctest_linux_nightly_generic.cmake

cmake/std/PullRequestLinuxIntelTestingSettings.cmake

@@ -0,0 +1 @@
+PullRequestLinuxGCCTestingSettings.cmake

cmake/std/sems/PullRequestIntel17.0.1TestingEnv.sh

@@ -0,0 +1,27 @@
+# This script can be used to load the appropriate environment for the
+# GCC 4.9.3 Pull Request testing build on a Linux machine that has access to
+# the SEMS NFS mount.
+
+# usage: $ source PullRequestGCC4.9.3TestingEnv.sh
+
+# After the environment is no longer needed, it can be purged using
+# $ module purge
+# or Trilinos/cmake/unload_sems_dev_env.sh
+
+source /projects/sems/modulefiles/utils/sems-modules-init.sh
+
+export SEMS_FORCE_LOCAL_COMPILER_VERSION=4.9.3
+module load sems-gcc/4.9.3
+module load sems-intel/17.0.1
+module load sems-mpich/3.2
+module load sems-python/2.7.9
+module load sems-cmake/3.5.2
+module load sems-git/2.10.1
+module load sems-boost/1.63.0/base
+module load sems-zlib/1.2.8/base
+module load sems-hdf5/1.8.12/parallel
+module load sems-netcdf/4.4.1/exo_parallel
+module load sems-parmetis/4.0.3/parallel
+module load sems-scotch/6.0.3/parallel
+module load sems-superlu/4.3/base
+