config.ini.example

[GENERAL]
# Comma-separated list of device types to emulate (ct001, shellypro3em, shellyemg3, shellyproem50)
DEVICE_TYPE = ct001
# Skip initial powermeter test on startup
SKIP_POWERMETER_TEST = False
# Sum power values of all phases and report on phase 1 (ct001 only and default is False)
DISABLE_SUM_PHASES = False
# Send absolute values (necessary for storage system) (ct001 only and default is False)
DISABLE_ABSOLUTE_VALUES = False
# Interval for sending power values in seconds (ct001 only and default is 1)
POLL_INTERVAL = 1

#[SHELLY]
#TYPE = 1PM #PLUS1PM #EM #3EM #3EMPRO
#IP = 192.168.1.100
#USER = username
#PASS = password
#METER_INDEX = meter1

#[TASMOTA]
#IP = 192.168.1.101
#USER = tasmota_user
#PASS = tasmota_pass
#JSON_STATUS = StatusSNS
#JSON_PAYLOAD_MQTT_PREFIX = SML
#JSON_POWER_MQTT_LABEL = Power
#JSON_POWER_INPUT_MQTT_LABEL = Power1
#JSON_POWER_OUTPUT_MQTT_LABEL = Power2
#JSON_POWER_CALCULATE = True

#[SHRDZM]
#IP = 192.168.1.102
#USER = shrdzm_user
#PASS = shrdzm_pass

#[EMLOG]
#IP = 192.168.1.103
#METER_INDEX = 0
#JSON_POWER_CALCULATE = True

#[IOBROKER]
#IP = 192.168.1.104
#PORT = 8087
#CURRENT_POWER_ALIAS = Alias.0.power
#POWER_CALCULATE = True
#POWER_INPUT_ALIAS = Alias.0.power_in
#POWER_OUTPUT_ALIAS = Alias.0.power_out

#[HOMEASSISTANT]
#IP = 192.168.1.105
#PORT = 8123
#HTTPS = True
#ACCESSTOKEN = YOUR_ACCESS_TOKEN
#CURRENT_POWER_ENTITY = sensor.current_power
#POWER_CALCULATE = True
#POWER_INPUT_ALIAS = sensor.power_input
#POWER_OUTPUT_ALIAS = sensor.power_output

#[VZLOGGER]
#IP = 192.168.1.106
#PORT = 8080
#UUID = your-uuid

#[ESPHOME]
#IP = 192.168.1.107
#PORT = 6052
#DOMAIN = your_domain
#ID = your_id

#[AMIS_READER]
#IP = 192.168.1.108

#[MODBUS]
#HOST = 192.168.1.100
#PORT = 502
#UNIT_ID = 1
#ADDRESS = 0
#COUNT = 1

#[MQTT]
#BROKER = broker.example.com
#PORT = 1883
#TOPIC = home/powermeter
#JSON_PATH = path.to.value (Optional)
#USERNAME = mqtt_user (Optional)
#PASSWORD = mqtt_pass (Optional)

#[SCRIPT]
#COMMAND = /path/to/your/script.sh