Home
As of 6/9/14 - We are updating the wiki to accommodate github's new and "improved" right hand navigation panel, and in general to clean up a bit. There may be some broken links until this process is complete. The actual pages can all be found in the right hand nav --->, but you will have to hunt for them. Thanks for your patience.
Affordable Industrial Grade Motion Control
Welcome to the TinyG wiki!
This wiki is the TinyG user manual and programmer's guide. We (Synthetos) maintain it, but it's an open wiki. If you want to post wiki-type stuff, feel free to do it here. Please let us know via a github Issue if it's anything major. Github Issues are good for requested changes, discussions and bona-fide software bugs.
The wiki has info for the current version of TinyG, which is the v8 hardware and firmware version 0.97. It also has docs for previous versions.
For general support use the Synthetos Forums The forum is for general questions about how to setup and use tinyg (and gShield). Sometimes the questions end up in the github issues list, but generally they do not. Feel free to post github issues as you see fit, but more people read the forum than the issues, so if you are looking for help the forum is probably a better choice.
There is also a TinyG Development Google Group. This is a conversation about new development, options, related products like controllers and android tablets, etc.
Please come visit / join any or all of the above.
- What is TinyG? - A hardware and software description
- TinyG Start Page
- Connecting TinyG
- Configuring TinyG
- Sending Gcode Files
- Troubleshooting
- More Setup Info
- TinyG Tuning
- [Homing and Limit Switch setup] (Homing-and-Limits-Description-and-Operation) and Troubleshooting Homing
- Updating Firmware
- Firmware Download Page
- Gcode Supported by TInyG
- Command Line Operation
- JSON Operation and JSON Details
- Status Reports
- Status Codes
- Units Modes - Inches and Millimeters
- Feedhold and Cycle Start (Pause and Resume)
- Shapeoko Notes and Example Shapeoko Setup
- Using TinyG with External Stepper Drivers
- TinyG Data Sheets
- Hardware and Mechanical
- Licensing
- TinyG Projects List your project here!
- Stepper Motors and Power Supplies