Home
Affordable Industrial Grade Motion Control
Welcome to the TinyG wiki!
As of 6/9/14 - Please be patient - we are updating the wiki to accommodate github's new and "improved" right hand navigation page, and in general to clean up a bit. There will be many broken links until this process is complete. Thanks for your patients. The actual pages can all be found in the right hand nav window, but you will have to hunt for them.
This wiki is used to keep documentation from version 0.95 onward. Documentation for previous versions - 0.94 and earlier - can also be found on this site. See the intro sections on various pages for the links.
This wiki is the TinyG user and programmer manual. We (Synthetos) maintain it, but it's an open wiki. If you want to post wiki-type stuff, feel free to do it here. Please let us know via a github Issue if it's anything major. Issues are good for requested changes, discussions and bona-fide software bugs.
For general support use the Synthetos Forums The forum is for general questions about how to setup and use tinyg (and grblshield). Sometimes the questions end up in the github issues list, but generally they do not. Feel free to post github issues as you see fit, but more people read the forum than the issues, so if you are looking for help the forum is probably a better choice.
There is also a TinyG Development Google Group. This is a conversation about new development, options, related products like controllers and android tablets, etc.
Please come visit / join any or all of the above.
- Initial Setup
- TinyG Tuning, and Configuration Reference
- [Homing and Limit Switch setup] (https://github.com/synthetos/TinyG/wiki/2.03-Homing-and-Limits-Description-and-Operation), and Troubleshooting Homing
- Sending Gcode Files
- Example Shapeoko Setup and Example Shapeoko Setup
- Automatic Z Homing When Milling PCBs
- Troubleshooting
- Updating Firmware
- Updating Firmware using the Boot Loader
- Updating Firmware using an External Programmer
- Firmware Download Pages
- Configuration Reference
- Gcode Support
- Command Line Operation
- JSON Operation
- Status Reports
- Feedhold and Cycle Start (Pause and Resume)
- Stepper Motors and Power Supplies
- Using TinyG with External Stepper Drivers
- TinyG Data Sheets
- TinyG Projects List your project here!