br-snapshot-manual.md

title	summary
TiDB Snapshot Backup and Restore Command Manual	Learn about the commands of TiDB snapshot backup and restore.

TiDB Snapshot Backup and Restore Command Manual

This document describes the commands of TiDB snapshot backup and restore according to the application scenarios, including:

• Back up cluster snapshots
• Back up a database
• Back up a table
• Back up multiple tables with table filter
• Encrypt the backup data
• Restore cluster snapshots
• Restore a database
• Restore a table
• Restore multiple tables with table filter
• Restore encrypted snapshots

For more information about snapshot backup and restore, refer to:

• Snapshot Backup and Restore Guide
• Backup and Restore Use Cases

Back up cluster snapshots

You can back up the latest or specified snapshot of the TiDB cluster using the br backup full command. For more information about the command, run the br backup full --help command.

br backup full \
    --pd "${PD_IP}:2379" \
    --backupts '2022-09-08 13:30:00' \
    --storage "s3://${backup_collection_addr}/snapshot-${date}?access-key=${access-key}&secret-access-key=${secret-access-key}" \
    --ratelimit 128 \
    --log-file backupfull.log

In the preceding command:

• --backupts: The time point of the snapshot. The format can be TSO or timestamp, such as 400036290571534337 or 2018-05-11 01:42:23. If the data of this snapshot is garbage collected, the br backup command returns an error and 'br' exits. If you leave this parameter unspecified, br picks the snapshot corresponding to the backup start time.
• --ratelimit: The maximum speed per TiKV performing backup tasks. The unit is in MiB/s.
• --log-file: The target file where br log is written.

During backup, a progress bar is displayed in the terminal, as shown below. When the progress bar advances to 100%, the backup is complete.

Full Backup <---------/................................................> 17.12%.

Back up a database or a table

Backup & Restore (BR) supports backing up partial data of a specified database or table from a cluster snapshot or incremental data backup. This feature allows you to filter out unwanted data from snapshot backup and incremental data backup, and back up only business-critical data.

Back up a database

To back up a database in a cluster, run the br backup db command.

The following example backs up the test database to Amazon S3:

br backup db \
    --pd "${PD_IP}:2379" \
    --db test \
    --storage "s3://${backup_collection_addr}/snapshot-${date}?access-key=${access-key}&secret-access-key=${secret-access-key}" \
    --ratelimit 128 \
    --log-file backuptable.log

In the preceding command, --db specifies the database name, and other parameters are the same as those in Back up TiDB cluster snapshots.

Back up a table

To back up a table in a cluster, run the br backup table command.

The following example backs up the test.usertable table to Amazon S3:

br backup table \
    --pd "${PD_IP}:2379" \
    --db test \
    --table usertable \
    --storage "s3://${backup_collection_addr}/snapshot-${date}?access-key=${access-key}&secret-access-key=${secret-access-key}" \
    --ratelimit 128 \
    --log-file backuptable.log

In the preceding command, --db and --table specify the database name and table name respectively, and other parameters are the same as those in Back up TiDB cluster snapshots.

Back up multiple tables with table filter

To back up multiple tables with more criteria, run the br backup full command and specify the table filters with --filter or -f.

The following example backs up tables that match the db*.tbl* filter rule to Amazon S3:

br backup full \
    --pd "${PD_IP}:2379" \
    --filter 'db*.tbl*' \
    --storage "s3://${backup_collection_addr}/snapshot-${date}?access-key=${access-key}&secret-access-key=${secret-access-key}" \
    --ratelimit 128 \
    --log-file backupfull.log

Encrypt the backup data

Warning:

This is an experimental feature. It is not recommended that you use it in the production environment.

BR supports encrypting backup data at the backup side and at the storage side when backing up to Amazon S3. You can choose either encryption method as required.

Since TiDB v5.3.0, you can encrypt backup data by configuring the following parameters:

• --crypter.method: Encryption algorithm, which can be aes128-ctr, aes192-ctr, or aes256-ctr. The default value is plaintext, indicating that data is not encrypted.
• --crypter.key: Encryption key in hexadecimal string format. It is a 128-bit (16 bytes) key for the algorithm aes128-ctr, a 24-byte key for the algorithm aes192-ctr, and a 32-byte key for the algorithm aes256-ctr.
• --crypter.key-file: The key file. You can directly pass in the file path where the key is stored as a parameter without passing in the crypter.key.

The following is an example:

br backup full\
    --pd ${PD_IP}:2379 \
    --storage "s3://${backup_collection_addr}/snapshot-${date}?access-key=${access-key}&secret-access-key=${secret-access-key}" \
    --crypter.method aes128-ctr \
    --crypter.key 0123456789abcdef0123456789abcdef

Note:

• If the key is lost, the backup data cannot be restored to the cluster.
• The encryption feature needs to be used on br and TiDB clusters v5.3.0 or later versions. The encrypted backup data cannot be restored on clusters earlier than v5.3.0.

Restore cluster snapshots

You can restore a TiDB cluster snapshot by running the br restore full command.

br restore full \
    --pd "${PD_IP}:2379" \
    --storage "s3://${backup_collection_addr}/snapshot-${date}?access-key=${access-key}&secret-access-key=${secret-access-key}" \
    --ratelimit 128 \
    --log-file restorefull.log

In the preceding command:

• --ratelimit: The maximum speed per TiKV performing backup tasks. The unit is in MiB/s.
• --log-file: The target file where the br log is written.

During restore, a progress bar is displayed in the terminal as shown below. When the progress bar advances to 100%, the restore task is completed. Then br will verify the restored data to ensure data security.

Full Restore <---------/...............................................> 17.12%.

Restore a database or a table

You can use br to restore partial data of a specified database or table from backup data. This feature allows you to filter out data that you do not need during the restore.

Restore a database

To restore a database to a cluster, run the br restore db command.

The following example restores the test database from the backup data to the target cluster:

br restore db \
    --pd "${PD_IP}:2379" \
    --db "test" \
    --ratelimit 128 \
    --storage "s3://${backup_collection_addr}/snapshot-${date}?access-key=${access-key}&secret-access-key=${secret-access-key}" \
    --log-file restore_db.log

In the preceding command, --db specifies the name of the database to be restored and other parameters are the same as those in Restore TiDB cluster snapshots.

Note:

When you restore the backup data, the database name specified by --db must be the same as the one specified by -- db in the backup command. Otherwise, the restore fails. This is because the metafile of the backup data (backupmeta file) records the database name, and you can only restore data to the database with the same name. The recommended method is to restore the backup data to the database with the same name in another cluster.

Restore a table

To restore a single table to a cluster, run the br restore table command.

The following example restores the test.usertable table from Amazon S3 to the target cluster:

br restore table \
    --pd "${PD_IP}:2379" \
    --db "test" \
    --table "usertable" \
    --ratelimit 128 \
    --storage "s3://${backup_collection_addr}/snapshot-${date}?access-key=${access-key}&secret-access-key=${secret-access-key}" \
    --log-file restore_table.log

In the preceding command, --table specifies the name of the table to be restored, and other parameters are the same as those in Restore a database.

Restore multiple tables with table filter

To restore multiple tables with more complex filter rules, run the br restore full command and specify the table filters with --filter or -f.

The following example restores tables that match the db*.tbl* filter rule from Amazon S3 to the target cluster:

br restore full \
    --pd "${PD_IP}:2379" \
    --filter 'db*.tbl*' \
    --storage "s3://${backup_collection_addr}/snapshot-${date}?access-key=${access-key}&secret-access-key=${secret-access-key}" \
    --log-file restorefull.log

Restore encrypted snapshots

Warning:

This is an experimental feature. It is not recommended that you use it in the production environment.

After encrypting the backup data, you need to pass in the corresponding decryption parameters to restore the data. Ensure that the decryption algorithm and key are correct. If the decryption algorithm or key is incorrect, the data cannot be restored. The following is an example:

br restore full\
    --pd "${PD_IP}:2379" \
    --storage "s3://${backup_collection_addr}/snapshot-${date}?access-key=${access-key}&secret-access-key=${secret-access-key}" \
    --crypter.method aes128-ctr \
    --crypter.key 0123456789abcdef0123456789abcdef