We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
when I was doing 'make install-firmware', there is a problem shown in the picture How can I solve it
The text was updated successfully, but these errors were encountered:
same issue. 🥲 could not solve this.
Sorry, something went wrong.
Don't try this installation methds anymore. I have tried another one and it works well. The link is: https://github.com/nexmonster/nexmon_csi_bin?tab=readme-ov-file
I use raspberry pi 4B and the image is: '2022-01-28-raspios-bullseye-armhf'. You can download the image here: https://downloads.raspberrypi.com/raspios_armhf/images/raspios_armhf-2022-01-28/
same issue. 🥲 could not solve this. Don't try this installation methds anymore. I have tried another one and it works well. The link is: https://github.com/nexmonster/nexmon_csi_bin?tab=readme-ov-file I use raspberry pi 4B and the image is: '2022-01-28-raspios-bullseye-armhf'. You can download the image here: https://downloads.raspberrypi.com/raspios_armhf/images/raspios_armhf-2022-01-28/
Thank you very much. This helped.
No branches or pull requests
when I was doing 'make install-firmware', there is a problem shown in the picture

How can I solve it
The text was updated successfully, but these errors were encountered: