RoboPeak USB Display Linux Driver Arm Suite is used to enable RoboPeak USB Display on ubuntu for arm (linaro) on arm SoCs.
Use scp to copy arm_suite.tar.bz2 to the host:
$ scp arm_suite.tar.bz2 ubuntu@your_mini_pc/arm_suite.tar.bz2
And than connect to your host via ssh to install the driver:
$ ssh -l ubuntu your_mini_pc
$ tar xf arm_suite.tar.bz2
$ cd arm_suite
$ sudo ./rpusbdisp_arm_tool.sh install
$ sudo ./rpusbdisp_arm_tool.sh auto_load
This will install prebuilt driver to the mini pc, as well as lightdm configuration and upstart configuration
Just reboot your mini pc by:
$ sudo reboot
The driver will be loaded automatically on system startup
When you plug in your RoboPeak USB Display, the driver daemon will automatically configure lightdm, and restart it. This will also happen when you unplug your device.
- NOTE: Every time you plug in or pull out your RoboPeak USB Display, the driver daemon will restart
lightdm, so your current GUI login session will be dropped *
If there is no prebuilt driver available for your device/kernel combination, you may build the kernel driver on your own, for detailed information please refer to our repository hosted on GitHub:
https://github.com/robopeak/rpusbdisp
Copyright (c) 2013 RoboPeak.com If you have any question or advice, please make us know. We will be very thankful if you contact us: mailto:[email protected]