diff --git a/TOC.md b/TOC.md index 060f09465d4e9..7d69692db126d 100644 --- a/TOC.md +++ b/TOC.md @@ -499,6 +499,7 @@ + [TiCDC Overview](/ticdc/ticdc-overview.md) + [TiCDC Open Protocol](/ticdc/ticdc-open-protocol.md) + [Table Filter](/table-filter.md) + + [Schedule Replicas by Topology Labels](/schedule-replicas-by-topology-labels.md) + FAQs + [TiDB FAQs](/faq/tidb-faq.md) + [SQL FAQs](/faq/sql-faq.md) diff --git a/configure-placement-rules.md b/configure-placement-rules.md index 8b1f5d0ae1ce5..ddaa9608bbbe7 100644 --- a/configure-placement-rules.md +++ b/configure-placement-rules.md @@ -49,7 +49,7 @@ The following table shows the meaning of each field in a rule: The meaning and function of `LocationLabels` are the same with those earlier than v4.0. For example, if you have deployed `[zone,rack,host]` that defines a three-layer topology: the cluster has multiple zones (Availability Zones), each zone has multiple racks, and each rack has multiple hosts. When performing schedule, PD first tries to place the Region's peers in different zones. If this try fails (such as there are three replicas but only two zones in total), PD guarantees to place these replicas in different racks. If the number of racks is not enough to guarantee isolation, then PD tries the host-level isolation. -The meaning and function of `IsolationLevel` is elaborated in [Cluster topology configuration](/location-awareness.md). For example, if you have deployed `[zone,rack,host]` that defines a three-layer topology with `LocationLabels` and set `IsolationLevel` to `zone`, then PD ensures that all peers of each Region are placed in different zones during the scheduling. If the minimum isolation level restriction on `IsolationLevel` cannot be met (for example, 3 replicas are configured but there are only 2 data zones in total), PD will not try to make up to meet this restriction. The default value of `IsolationLevel` is an empty string, which means that it is disabled. +The meaning and function of `IsolationLevel` is elaborated in [Cluster topology configuration](/schedule-replicas-by-topology-labels.md). For example, if you have deployed `[zone,rack,host]` that defines a three-layer topology with `LocationLabels` and set `IsolationLevel` to `zone`, then PD ensures that all peers of each Region are placed in different zones during the scheduling. If the minimum isolation level restriction on `IsolationLevel` cannot be met (for example, 3 replicas are configured but there are only 2 data zones in total), PD will not try to make up to meet this restriction. The default value of `IsolationLevel` is an empty string, which means that it is disabled. ### Fields of the rule group diff --git a/location-awareness.md b/location-awareness.md deleted file mode 100644 index 46881778d6f2e..0000000000000 --- a/location-awareness.md +++ /dev/null @@ -1,128 +0,0 @@ ---- -title: Cluster Topology Configuration -summary: Learn to configure cluster topology to maximize the capacity for disaster recovery. -aliases: ['/docs/dev/location-awareness/','/docs/dev/how-to/deploy/geographic-redundancy/location-awareness/'] ---- - -# Cluster Topology Configuration - -## Overview - -PD schedules according to the topology of the TiKV cluster to maximize the TiKV's capability for disaster recovery. It is recommended that TiKV nodes are physically distributed as much as possible. For example, TiKV nodes can be distributed on different racks or even in different data zones. According to the topology information of TiKV, the PD scheduler automatically performs scheduling at the background to isolate the replicas of Regions as much as possible, thereby maximizing the capability for disaster recovery. - -Before you begin, see [Deploy TiDB Using TiDB Ansible (Recommended)](/online-deployment-using-ansible.md) and [Deploy TiDB Using Docker](/test-deployment-using-docker.md). - -## TiKV reports the topological information - -TiKV reports the topological information to PD according to the startup parameter or configuration of TiKV. - -Assuming that the topology has three structures: zone > rack > host, use labels to specify the following information: - -Startup parameter: - -``` -tikv-server --labels zone=,rack=,host= -``` - -Configuration: - -``` toml -[server] -labels = "zone=,rack=,host=" -``` - -## PD understands the TiKV topology - -PD gets the topology of TiKV cluster through the PD configuration. - -``` toml -[replication] -max-replicas = 3 -location-labels = ["zone", "rack", "host"] -``` - -After the PD cluster is initialized, you need to use the pd-ctl tool to make online changes: - -{{< copyable "shell-regular" >}} - -```bash -pd-ctl config set location-labels zone,rack,host -``` - -`location-labels` needs to correspond to the TiKV `labels` name so that PD can understand that the `labels` represents the TiKV topology. - -> **Note:** -> -> You must configure `location-labels` for PD and `labels` for TiKV at the same time for `labels` to take effect. - -## PD restricts the TiKV topology - -Having configured `location-labels`, you can further enhance the topological isolation requirements on TiKV clusters through the `isolation-level` parameter. Assume that you have made a three-layer cluster topology by configuring `location-labels` according to the instructions above: zone -> rack -> host, and have configured the `isolation-level` as follows: - -{{< copyable "" >}} - -```toml -[replication] -isolation-level = "zone" -``` - -After the PD cluster is initialized, you need to use the pd-ctl tool to make online changes: - -{{< copyable "shell-regular" >}} - -```bash -pd-ctl config set isolation-level zone -``` - -`isolation-level` needs to correspond to one of the `location-labels` names so that PD can understand that this label represents the TiKV topology. - -> **Note:** -> -> `isolation-level` is empty by default, that is, there is no mandatory isolation level restriction. To set it, you must first configure the PD's `location-labels` parameter, and ensure that the value of `isolation-level` must be one of the `location-labels` names. - -## PD schedules based on the TiKV topology - -PD makes optimal scheduling according to the topological information. You just need to care about what kind of topology can achieve the desired effect. - -If you use 3 replicas and hope that the TiDB cluster is always highly available even when a data zone goes down, you need at least 4 data zones. - -Assume that you have 4 data zones, each zone has 2 racks, and each rack has 2 hosts. You can start 2 TiKV instances on each host: - -``` -# zone=z1 -tikv-server --labels zone=z1,rack=r1,host=h1 -tikv-server --labels zone=z1,rack=r1,host=h2 -tikv-server --labels zone=z1,rack=r2,host=h1 -tikv-server --labels zone=z1,rack=r2,host=h2 - -# zone=z2 -tikv-server --labels zone=z2,rack=r1,host=h1 -tikv-server --labels zone=z2,rack=r1,host=h2 -tikv-server --labels zone=z2,rack=r2,host=h1 -tikv-server --labels zone=z2,rack=r2,host=h2 - -# zone=z3 -tikv-server --labels zone=z3,rack=r1,host=h1 -tikv-server --labels zone=z3,rack=r1,host=h2 -tikv-server --labels zone=z3,rack=r2,host=h1 -tikv-server --labels zone=z3,rack=r2,host=h2 - -# zone=z4 -tikv-server --labels zone=z4,rack=r1,host=h1 -tikv-server --labels zone=z4,rack=r1,host=h2 -tikv-server --labels zone=z4,rack=r2,host=h1 -tikv-server --labels zone=z4,rack=r2,host=h2 -``` - -In other words, 16 TiKV instances are distributed across 4 data zones, 8 racks and 16 machines. - -In this case, PD will schedule different replicas of each datum to different data zones. - -- If one of the data zones goes down, the high availability of the TiDB cluster is not affected. -- If the data zone cannot recover within a period of time, PD will remove the replica from this data zone. - -However, if `isolation-level` is set to `zone`, PD will ensure that different replicas of a Region are isolated from each other at the zone level, even if guaranteeing this restriction does not meet the requirement of `max-replicas`. For example, a TiKV cluster is distributed across three data zones z1/z2/z3. Each Region has three replicas as required, and PD distributes the three replicas of the same Region to these three data zones respectively. If a power outage occurs in z1 and cannot be recovered after a period of time, PD determines that the Region replicas on z1 are no longer available. However, because `isolation-level` is set to `zone`, PD needs to strictly guarantee that different replicas of the same Region will not be scheduled on the same data zone. Because both z2 and z3 already have replicas, PD will not perform any scheduling under the minimum isolation level restriction of `isolation-level`, even if there are only two replicas at this moment. - -Similarly, when `isolation-level` is set to `rack`, the minimum isolation level applies to different racks in the same data zone. With this configuration, the isolation at the zone level is guaranteed first if possible. When the isolation at the zone level cannot be guaranteed, PD tries to avoid scheduling different replicas to the same rack in the same zone, and so on. - -In summary, PD maximizes the disaster recovery of the cluster according to the current topology. Therefore, if you want to achieve a certain level of disaster recovery, deploy more machines on different sites according to the topology than the number of `max-replicas`. TiDB also provides a mandatory configuration item `isolation-level` to control the topological isolation level of data according to different cases. diff --git a/pd-configuration-file.md b/pd-configuration-file.md index 950f1099614f3..f3a71388f3354 100644 --- a/pd-configuration-file.md +++ b/pd-configuration-file.md @@ -311,13 +311,13 @@ Configuration items related to replicas + The topology information of a TiKV cluster + Default value: `[]` -+ [Cluster topology configuration](/location-awareness.md) ++ [Cluster topology configuration](/schedule-replicas-by-topology-labels.md) ### `isolation-level` + The minimum topological isolation level of a TiKV cluster + Default value: `""` -+ [Cluster topology configuration](/location-awareness.md) ++ [Cluster topology configuration](/schedule-replicas-by-topology-labels.md) ### `strictly-match-label` diff --git a/schedule-replicas-by-topology-labels.md b/schedule-replicas-by-topology-labels.md new file mode 100644 index 0000000000000..546bab38743aa --- /dev/null +++ b/schedule-replicas-by-topology-labels.md @@ -0,0 +1,194 @@ +--- +title: Schedule Replicas by Topology Labels +summary: Learn how to schedule replicas by topology labels. +aliases: ['/docs/dev/location-awareness/','/docs/dev/how-to/deploy/geographic-redundancy/location-awareness/','/tidb/dev/location-awareness'] +--- + +# Schedule Replicas by Topology Labels + +To improve the high availability and disaster recovery capability of TiDB clusters, it is recommended that TiKV nodes are physically scattered as much as possible. For example, TiKV nodes can be distributed on different racks or even in different data centers. According to the topology information of TiKV, the PD scheduler automatically performs scheduling at the background to isolate each replica of a Region as much as possible, which maximizes the capability of disaster recovery. + +To make this mechanism effective, you need to properly configure TiKV and PD so that the topology information of the cluster, especially the TiKV location information, is reported to PD during deployment. Before you begin, see [Deploy TiDB Using TiUP](/production-deployment-using-tiup.md) first. + +## Configure `labels` based on the cluster topology + +### Configure `labels` for TiKV + +You can use the command-line flag or set the TiKV configuration file to bind some attributes in the form of key-value pairs. These attributes are called `labels`. After TiKV is started, it reports its `labels` to PD so users can identify the location of TiKV nodes. + +Assume that the topology has three layers: zone > rack > host, and you can use these labels (zone, rack, host) to set the TiKV location in one of the following methods: + ++ Use the command-line flag: + + {{< copyable "" >}} + + ``` + tikv-server --labels zone=,rack=,host= + ``` + ++ Configure in the TiKV configuration file: + + {{< copyable "" >}} + + ```toml + [server] + labels = "zone=,rack=,host=" + ``` + +### Configure `location-labels` for PD + +According to the description above, the label can be any key-value pair used to describe TiKV attributes. But PD cannot identify the location-related labels and the layer relationship of these labels. Therefore, you need to make the following configuration for PD to understand the TiKV node topology. + ++ If the PD cluster is not initialized, configure `location-labels` in the PD configuration file: + + {{< copyable "" >}} + + ```toml + [replication] + location-labels = ["zone", "rack", "host"] + ``` + ++ If the PD cluster is already initialized, use the pd-ctl tool to make online changes: + + {{< copyable "shell-regular" >}} + + ```bash + pd-ctl config set location-labels zone,rack,host + ``` + +The `location-labels` configuration is an array of strings, and each item corresponds to the key of TiKV `labels`. The sequence of each key represents the layer relationship of different labels. + +> **Note:** +> +> You must configure `location-labels` for PD and `labels` for TiKV at the same time for the configurations to take effect. Otherwise, PD does not perform scheduling according to the topology. + +### Configure `isolation-level` for PD + +If `location-labels` has been configured, you can further enhance the topological isolation requirements on TiKV clusters by configuring `isolation-level` in the PD configuration file. + +Assume that you have made a three-layer cluster topology by configuring `location-labels` according to the instructions above: zone -> rack -> host, you can configure the `isolation-level` to `zone` as follows: + +{{< copyable "" >}} + +```toml +[replication] +isolation-level = "zone" +``` + +If the PD cluster is already initialized, you need to use the pd-ctl tool to make online changes: + +{{< copyable "shell-regular" >}} + +```bash +pd-ctl config set isolation-level zone +``` + +The `location-level` configuration is an array of strings, which needs to correspond to a key of `location-labels`. This parameter limits the minimum and mandatory isolation level requirements on TiKV topology clusters. + +> **Note:** +> +> `isolation-level` is empty by default, which means there is no mandatory restriction on the isolation level. To set it, you need to configure `location-labels` for PD and ensure that the value of `isolation-level` is one of `location-labels` names. + +### Configure a cluster using TiUP (recommended) + +When using TiUP to deploy a cluster, you can configure the TiKV location in the [initialization configuration file](/production-deployment-using-tiup.md#step-3-edit-the-initialization-configuration-file). TiUP will generate the corresponding TiKV and PD configuration files during deployment. + +In the following example, a two-layer topology of `zone/host` is defined. The TiKV nodes of the cluster are distributed among three zones, each zone with two hosts. In z1, two TiKV instances are deployed per host. In z2 and z3, one TiKV instance is deployed per host. In the following example, `tikv-n` represents the IP address of the `n`th TiKV node. + +``` +server_configs: + pd: + replication.location-labels: ["zone", "host"] + +tikv_servers: +# z1 + - host: tikv-1 + config: + server.labels: + zone: z1 + host: h1 + - host: tikv-2 + config: + server.labels: + zone: z1 + host: h1 + - host: tikv-3 + config: + server.labels: + zone: z1 + host: h2 + - host: tikv-4 + config: + server.labels: + zone: z1 + host: h2 +# z2 + - host: tikv-5 + config: + server.labels: + zone: z2 + host: h1 + - host: tikv-6 + config: + server.labels: + zone: z2 + host: h2 +# z3 + - host: tikv-7 + config: + server.labels: + zone: z3 + host: h1 + - host: tikv-8 + config: + server.labels: + zone: z3 + host: h2s +``` + +For details, see [Geo-distributed Deployment topology](/geo-distributed-deployment-topology.md). + +
+ Configure a cluster using TiDB Ansible + +When using TiDB Ansible to deploy a cluster, you can directly configure the TiKV location in the `inventory.ini` file. `tidb-ansible` will generate the corresponding TiKV and PD configuration files during deployment. + +In the following example, a two-layer topology of `zone/host` is defined. The TiKV nodes of the cluster are distributed among three zones, each zone with two hosts. In z1, two TiKV instances are deployed per host. In z2 and z3, one TiKV instance is deployed per host. + +``` +[tikv_servers] +# z1 +tikv-1 labels="zone=z1,host=h1" +tikv-2 labels="zone=z1,host=h1" +tikv-3 labels="zone=z1,host=h2" +tikv-4 labels="zone=z1,host=h2" +# z2 +tikv-5 labels="zone=z2,host=h1" +tikv-6 labels="zone=z2,host=h2" +# z3 +tikv-7 labels="zone=z3,host=h1" +tikv-8 labels="zone=z3,host=h2" + +[pd_servers:vars] +location_labels = ["zone", "host"] +``` + +
+ +## PD schedules based on topology label + +PD schedules replicas according to the label layer to make sure that different replicas of the same data are scattered as much as possible. + +Take the topology in the previous section as an example. + +Assume that the number of cluster replicas is 3 (`max-replicas=3`). Because there are 3 zones in total, PD ensures that the 3 replicas of each Region are respectively placed in z1, z2, and z3. In this way, the TiDB cluster is still available when one data center fails. + +Then, assume that the number of cluster replicas is 5 (`max-replicas=5`). Because there are only 3 zones in total, PD cannot guarantee the isolation of each replica at the zone level. In this situation, the PD scheduler will ensure replica isolation at the host level. In other words, multiple replicas of a Region might be distributed in the same zone but not on the same host. + +In the case of the 5-replica configuration, if z3 fails or is isolated as a whole, and cannot be recovered after a period of time (controlled by `max-store-down-time`), PD will make up the 5 replicas through scheduling. At this time, only 3 hosts are available. This means that host-level isolation cannot be guaranteed and that multiple replicas might be scheduled to the same host. But if the `isolation-level` value is set to `zone` instead of being left empty, this specifies the minimum physical isolation requirements for Region replicas. That is to say, PD will ensure that replicas of the same Region are scattered among different zones. PD will not perform corresponding scheduling even if following this isolation restriction does not meet the requirement of `max-replicas` for multiple replicas. + +For example, a TiKV cluster is distributed across three data zones z1, z2, and z3. Each Region has three replicas as required, and PD distributes the three replicas of the same Region to these three data zones respectively. If a power outage occurs in z1 and cannot be recovered after a period of time, PD determines that the Region replicas on z1 are no longer available. However, because `isolation-level` is set to `zone`, PD needs to strictly guarantee that different replicas of the same Region will not be scheduled on the same data zone. Because both z2 and z3 already have replicas, PD will not perform any scheduling under the minimum isolation level restriction of `isolation-level`, even if there are only two replicas at this moment. + +Similarly, when `isolation-level` is set to `rack`, the minimum isolation level applies to different racks in the same data center. With this configuration, the isolation at the zone layer is guaranteed first if possible. When the isolation at the zone level cannot be guaranteed, PD tries to avoid scheduling different replicas to the same rack in the same zone. The scheduling works similarly when `isolation-level` is set to `host` where PD first guarantees the isolation level of rack, and then the level of host. + +In summary, PD maximizes the disaster recovery of the cluster according to the current topology. Therefore, if you want to achieve a certain level of disaster recovery, deploy more machines on different sites according to the topology than the number of `max-replicas`. TiDB also provides mandatory configuration items such as `isolation-level` for you to more flexibly control the topological isolation level of data according to different scenarios. diff --git a/tidb-scheduling.md b/tidb-scheduling.md index dd0d645dbfb3e..84e9cae9f2225 100644 --- a/tidb-scheduling.md +++ b/tidb-scheduling.md @@ -75,7 +75,7 @@ Scheduling is based on information collection. In short, the PD scheduling compo * Data read/write speed * The number of snapshots that are sent/received (The data might be replicated between replicas through snapshots) * Whether the store is overloaded - * Labels (See [Perception of Topology](/location-awareness.md)) + * Labels (See [Perception of Topology](/schedule-replicas-by-topology-labels.md)) - Information reported by Region leaders: