update

CMakeLists.txt

@@ -65,7 +65,7 @@ target_link_libraries(fv3core PRIVATE fms)
 target_link_libraries(fv3core PRIVATE gfsphysics)
 target_link_libraries(fv3core PRIVATE ipd)
 
-target_include_directories(fv3core PRIVATE ${ESMF_MOD})
+target_include_directories(fv3core PRIVATE atmos_cubed_sphere ${ESMF_MOD})
 
 # end of fv3core
 

atmos_model.F90

@@ -78,7 +78,7 @@ module atmos_model_mod
 use atmosphere_mod,     only: atmosphere_scalar_field_halo
 use atmosphere_mod,     only: atmosphere_get_bottom_layer
 use atmosphere_mod,     only: set_atmosphere_pelist
-use atmosphere_mod,     only: Atm, mytile
+use atmosphere_mod,     only: Atm, mygrid
 use block_control_mod,  only: block_control_type, define_blocks_packed
 use DYCORE_typedefs,    only: DYCORE_data_type, DYCORE_diag_type
 #ifdef CCPP
@@ -336,6 +336,28 @@ subroutine update_atmos_radiation_physics (Atmos)
 !        print *,'in atmos_model, after assign_importdata, rc=',rc
       endif
 
+      ! Calculate total non-physics tendencies by substracting old IPD Stateout
+      ! variables from new/updated IPD Statein variables (gives the tendencies
+      ! due to anything else than physics)
+      if (IPD_Control%ldiag3d) then
+        do nb = 1,Atm_block%nblks
+          IPD_Data(nb)%Intdiag%du3dt(:,:,8)  = IPD_Data(nb)%Intdiag%du3dt(:,:,8)  &
+                                              + (IPD_Data(nb)%Statein%ugrs - IPD_Data(nb)%Stateout%gu0)
+          IPD_Data(nb)%Intdiag%dv3dt(:,:,8)  = IPD_Data(nb)%Intdiag%dv3dt(:,:,8)  &
+                                              + (IPD_Data(nb)%Statein%vgrs - IPD_Data(nb)%Stateout%gv0)
+          IPD_Data(nb)%Intdiag%dt3dt(:,:,11) = IPD_Data(nb)%Intdiag%dt3dt(:,:,11) &
+                                              + (IPD_Data(nb)%Statein%tgrs - IPD_Data(nb)%Stateout%gt0)
+        enddo
+        if (IPD_Control%qdiag3d) then
+          do nb = 1,Atm_block%nblks
+            IPD_Data(nb)%Intdiag%dq3dt(:,:,12) = IPD_Data(nb)%Intdiag%dq3dt(:,:,12) &
+                  + (IPD_Data(nb)%Statein%qgrs(:,:,IPD_Control%ntqv) - IPD_Data(nb)%Stateout%gq0(:,:,IPD_Control%ntqv))
+            IPD_Data(nb)%Intdiag%dq3dt(:,:,13) = IPD_Data(nb)%Intdiag%dq3dt(:,:,13) &
+                  + (IPD_Data(nb)%Statein%qgrs(:,:,IPD_Control%ntoz) - IPD_Data(nb)%Stateout%gq0(:,:,IPD_Control%ntoz))
+          enddo
+        endif
+      endif
+
       call mpp_clock_end(setupClock)
 
       if (mpp_pe() == mpp_root_pe() .and. debug) write(6,*) "radiation driver"
@@ -466,7 +488,7 @@ subroutine atmos_model_init (Atmos, Time_init, Time, Time_step)
   integer              :: bdat(8), cdat(8)
   integer              :: ntracers, maxhf, maxh
   character(len=32), allocatable, target :: tracer_names(:)
-  integer :: nthrds
+  integer :: nthrds, nb
 
 !-----------------------------------------------------------------------
 
@@ -604,8 +626,8 @@ subroutine atmos_model_init (Atmos, Time_init, Time, Time_step)
    Init_parm%area            => Atmos%area
    Init_parm%tracer_names    => tracer_names
 #ifdef CCPP
-   Init_parm%restart         = Atm(mytile)%flagstruct%warm_start
-   Init_parm%hydrostatic     = Atm(mytile)%flagstruct%hydrostatic
+   Init_parm%restart         = Atm(mygrid)%flagstruct%warm_start
+   Init_parm%hydrostatic     = Atm(mygrid)%flagstruct%hydrostatic
 #endif
 
 #ifdef INTERNAL_FILE_NML
@@ -633,17 +655,6 @@ subroutine atmos_model_init (Atmos, Time_init, Time, Time_step)
       if(IPD_Control%me == IPD_Control%master) print *,'do_skeb=',IPD_Control%do_skeb
    end if
 
-#ifdef CCPP
-   ! Initialize the CCPP framework
-   call CCPP_step (step="init", nblks=Atm_block%nblks, ierr=ierr)
-   if (ierr/=0)  call mpp_error(FATAL, 'Call to CCPP init step failed')
-   ! Doing the init here requires logic in thompson aerosol init if no aerosol
-   ! profiles are specified and internal profiles are calculated, because these
-   ! require temperature/geopotential etc which are not yet set. Sim. for RUC LSM.
-   call CCPP_step (step="physics_init", nblks=Atm_block%nblks, ierr=ierr)
-   if (ierr/=0)  call mpp_error(FATAL, 'Call to CCPP physics_init step failed')
-#endif
-
    Atmos%Diag => IPD_Diag
 
    if (IPD_Control%do_sfcperts) then
@@ -677,7 +688,7 @@ subroutine atmos_model_init (Atmos, Time_init, Time, Time_step)
     endif
    endif
 
-   Atm(mytile)%flagstruct%do_skeb = IPD_Control%do_skeb
+   Atm(mygrid)%flagstruct%do_skeb = IPD_Control%do_skeb
 
 !  initialize the IAU module
    call iau_initialize (IPD_Control,IAU_data,Init_parm)
@@ -698,11 +709,35 @@ subroutine atmos_model_init (Atmos, Time_init, Time, Time_step)
    call FV3GFS_diag_register (IPD_Diag, Time, Atm_block, IPD_Control, Atmos%lon, Atmos%lat, Atmos%axes)
    call IPD_initialize_rst (IPD_Control, IPD_Data, IPD_Diag, IPD_Restart, Init_parm)
 #ifdef CCPP
-   call FV3GFS_restart_read (IPD_Data, IPD_Restart, Atm_block, IPD_Control, Atmos%domain, Atm(mytile)%flagstruct%warm_start)
+   call FV3GFS_restart_read (IPD_Data, IPD_Restart, Atm_block, IPD_Control, Atmos%domain, Atm(mygrid)%flagstruct%warm_start)
 #else
    call FV3GFS_restart_read (IPD_Data, IPD_Restart, Atm_block, IPD_Control, Atmos%domain)
 #endif
 
+   ! Populate the IPD_Data%Statein container with the prognostic state
+   ! in Atm_block, which contains the initial conditions/restart data.
+   call atmos_phys_driver_statein (IPD_data, Atm_block, flip_vc)
+
+   ! When asked to calculate 3-dim. tendencies, set Stateout variables to
+   ! Statein variables here in order to capture the first call to dycore
+    if (IPD_Control%ldiag3d) then
+      do nb = 1,Atm_block%nblks
+        IPD_Data(nb)%Stateout%gu0 = IPD_Data(nb)%Statein%ugrs
+        IPD_Data(nb)%Stateout%gv0 = IPD_Data(nb)%Statein%vgrs
+        IPD_Data(nb)%Stateout%gt0 = IPD_Data(nb)%Statein%tgrs
+        IPD_Data(nb)%Stateout%gq0 = IPD_Data(nb)%Statein%qgrs
+      enddo
+    endif
+
+#ifdef CCPP
+   ! Initialize the CCPP framework
+   call CCPP_step (step="init", nblks=Atm_block%nblks, ierr=ierr)
+   if (ierr/=0)  call mpp_error(FATAL, 'Call to CCPP init step failed')
+   ! Initialize the CCPP physics
+   call CCPP_step (step="physics_init", nblks=Atm_block%nblks, ierr=ierr)
+   if (ierr/=0)  call mpp_error(FATAL, 'Call to CCPP physics_init step failed')
+#endif
+
    !--- set the initial diagnostic timestamp
    diag_time = Time 
    if (output_1st_tstep_rst) then
@@ -1456,7 +1491,7 @@ subroutine update_atmos_chemistry(state, rc)
           ib = i + Atm_block%isc - 1
           nb = Atm_block%blkno(ib,jb)
           ix = Atm_block%ixp(ib,jb)
-          hpbl(i,j)   = IPD_Data(nb)%IntDiag%hpbl(ix)
+          hpbl(i,j)   = IPD_Data(nb)%Tbd%hpbl(ix)
           area(i,j)   = IPD_Data(nb)%Grid%area(ix)
           stype(i,j)  = IPD_Data(nb)%Sfcprop%stype(ix)
           rainc(i,j)  = IPD_Data(nb)%Coupling%rainc_cpl(ix)