This repository has been archived by the owner on Sep 30, 2024. It is now read-only.
flexfb
Generic driver for various LCD Controllers.
This driver tries to be a solution for the many LCD Controllers available, without having to write drivers for them all.
One strength is that it is runtime configurable. Download image and start using with an "unsupported" display.
The driver supports both SPI devices: flexfb and platform devices: flexpfb. fbtft_device has support for both.
-
height
Display height (required) -
width
Display width (required) -
init
Init sequence (required)
Markers: -1: command begin, -2: millisecond delay, -3: end of init sequence
No spaces allowed -
setaddrwin
Which set_addr_win() implementation to use
0 - st7735r, hx8340
1 - ili9320, ili9325
2 - ssd1289 -
buswidth
Width of databus (default: 8) -
regwidth
Width of controller register (default: 8) -
nobacklight
Turn off backlight functionality. -
rotate
Rotate display (0=normal, 1=clockwise, 2=upside down, 3=counterclockwise)
Applies to some drivers -
bgr
BlueGreenRed instead of RedGreenBlue
Applies to some drivers
Emulating sainsmart18fb
modprobe fbtft_device name=flexfb
modprobe flexfb width=128 height=160 init=-1,0x01,-2,150,-1,0x11,-2,500,-1,0xB1,0x01,0x2C,0x2D,-1,0xB2,0x01,0x2C,0x2D,-1,0xB3,0x01,0x2C,0x2D,0x01,0x2C,0x2D,-1,0xB4,0x07,-1,0xC0,0xA2,0x02,0x84,-1,0xC1,0xC5,-1,0xC2,0x0A,0x00,-1,0xC3,0x8A,0x2A,-1,0xC4,0x8A,0xEE,-1,0xC5,0x0E,-1,0x20,-1,0x36,0xC0,-1,0x3A,0x05,-1,0xE0,0x0f,0x1a,0x0f,0x18,0x2f,0x28,0x20,0x22,0x1f,0x1b,0x23,0x37,0x00,0x07,0x02,0x10,-1,0xE1,0x0f,0x1b,0x0f,0x17,0x33,0x2c,0x29,0x2e,0x30,0x30,0x39,0x3f,0x00,0x07,0x03,0x10,-1,0x29,-2,100,-1,0x13,-2,10,-3
Register 0x36 controls rotation and rgb/bgr.
Support for ssd1289 will be added in the upcoming image.
Use SPI interface circuit
modprobe fbtft_device name=flexfb speed=16000000 gpios=reset:25,dc:24
modprobe flexfb debug=3 width=240 height=320 rotate=0 regwidth=16 setaddrwin=2 init=-1,0x00,0x0001,-1,0x03,0xA8A4,-1,0x0C,0x0000,-1,0x0D,0x080C,-1,0x0E,0x2B00,-1,0x1E,0x00B7,-1,0x01,0x2B3F,-1,0x02,0x0600,-1,0x10,0x0000,-1,0x11,0x6070,-1,0x05,0x0000,-1,0x06,0x0000,-1,0x16,0xEF1C,-1,0x17,0x0003,-1,0x07,0x0233,-1,0x0B,0x0000,-1,0x0F,0x0000,-1,0x41,0x0000,-1,0x42,0x0000,-1,0x48,0x0000,-1,0x49,0x013F,-1,0x4A,0x0000,-1,0x4B,0x0000,-1,0x44,0xEF00,-1,0x45,0x0000,-1,0x46,0x013F,-1,0x30,0x0707,-1,0x31,0x0204,-1,0x32,0x0204,-1,0x33,0x0502,-1,0x34,0x0507,-1,0x35,0x0204,-1,0x36,0x0204,-1,0x37,0x0502,-1,0x3A,0x0302,-1,0x3B,0x0302,-1,0x23,0x0000,-1,0x24,0x0000,-1,0x25,0x8000,-1,0x4f,0x0000,-1,0x4e,0x0000,-1,0x22,-3
Register 0x11 controls rotation: 0=0x6070, 1=0x6068, 2=0x6040, 3=0x6058
Landscape example
modprobe flexfb debug=3 width=320 height=240 rotate=1 regwidth=16 setaddrwin=2 init=-1,0x00,0x0001,-1,0x03,0xA8A4,-1,0x0C,0x0000,-1,0x0D,0x080C,-1,0x0E,0x2B00,-1,0x1E,0x00B7,-1,0x01,0x2B3F,-1,0x02,0x0600,-1,0x10,0x0000,-1,0x11,0x6068,-1,0x05,0x0000,-1,0x06,0x0000,-1,0x16,0xEF1C,-1,0x17,0x0003,-1,0x07,0x0233,-1,0x0B,0x0000,-1,0x0F,0x0000,-1,0x41,0x0000,-1,0x42,0x0000,-1,0x48,0x0000,-1,0x49,0x013F,-1,0x4A,0x0000,-1,0x4B,0x0000,-1,0x44,0xEF00,-1,0x45,0x0000,-1,0x46,0x013F,-1,0x30,0x0707,-1,0x31,0x0204,-1,0x32,0x0204,-1,0x33,0x0502,-1,0x34,0x0507,-1,0x35,0x0204,-1,0x36,0x0204,-1,0x37,0x0502,-1,0x3A,0x0302,-1,0x3B,0x0302,-1,0x23,0x0000,-1,0x24,0x0000,-1,0x25,0x8000,-1,0x4f,0x0000,-1,0x4e,0x0000,-1,0x22,-3
Emulating adafruit22fb (no 9-bit emulation support).
modprobe fbtft_device name=flexfb
modprobe flexfb width=176 height=220 buswidth=9 init=-1,0xC1,0xFF,0x83,0x40,-1,0x11,-2,150,-1,0xCA,0x70,0x00,0xD9,-1,0xB0,0x01,0x11,-1,0xC9,0x90,0x49,0x10,0x28,0x28,0x10,0x00,0x06,-2,20,-1,0xC2,0x60,0x71,0x01,0x0E,0x05,0x02,0x09,0x31,0x0A,-1,0xC3,0x67,0x30,0x61,0x17,0x48,0x07,0x05,0x33,-2,10,-1,0xB5,0x35,0x20,0x45,-1,0xB4,0x33,0x25,0x4C,-2,10,-1,0x3A,0x05,-1,0x29,-2,10,-3
Register 0x36 controls rotation and rgb/bgr.
Emulating itdb28fb
modprobe fbtft_device name=flexpfb
modprobe flexfb width=240 height=320 regwidth=16 setaddrwin=1 init=-1,0x00E3,0x3008,-1,0x00E7,0x0012,-1,0x00EF,0x1231,-1,0x0001,0x0100,-1,0x0002,0x0700,-1,0x0003,0x1030,-1,0x0004,0x0000,-1,0x0008,0x0207,-1,0x0009,0x0000,-1,0x000A,0x0000,-1,0x000C,0x0000,-1,0x000D,0x0000,-1,0x000F,0x0000,-1,0x0010,0x0000,-1,0x0011,0x0007,-1,0x0012,0x0000,-1,0x0013,0x0000,-2,200,-1,0x0010,0x1690,-1,0x0011,0x0223,-2,50,-1,0x0012,0x000D,-2,50,-1,0x0013,0x1200,-1,0x0029,0x000A,-1,0x002B,0x000C,-2,50,-1,0x0020,0x0000,-1,0x0021,0x0000,-1,0x0030,0x0000,-1,0x0031,0x0506,-1,0x0032,0x0104,-1,0x0035,0x0207,-1,0x0036,0x000F,-1,0x0037,0x0306,-1,0x0038,0x0102,-1,0x0039,0x0707,-1,0x003C,0x0702,-1,0x003D,0x1604,-1,0x0050,0x0000,-1,0x0051,0x00EF,-1,0x0052,0x0000,-1,0x0053,0x013F,-1,0x0060,0xA700,-1,0x0061,0x0001,-1,0x006A,0x0000,-1,0x0080,0x0000,-1,0x0081,0x0000,-1,0x0082,0x0000,-1,0x0083,0x0000,-1,0x0084,0x0000,-1,0x0085,0x0000,-1,0x0090,0x0010,-1,0x0092,0x0600,-1,0x0007,0x0133,-3
Register 0x0003 controls rotation: 0=0x1030, 1=0x1028, 2=0x1000, 3=0x1018
Landscape example
modprobe flexfb rotate=1 width=320 height=240 regwidth=16 setaddrwin=1 init=-1,0x00E3,0x3008,-1,0x00E7,0x0012,-1,0x00EF,0x1231,-1,0x0001,0x0100,-1,0x0002,0x0700,-1,0x0003,0x1028,-1,0x0004,0x0000,-1,0x0008,0x0207,-1,0x0009,0x0000,-1,0x000A,0x0000,-1,0x000C,0x0000,-1,0x000D,0x0000,-1,0x000F,0x0000,-1,0x0010,0x0000,-1,0x0011,0x0007,-1,0x0012,0x0000,-1,0x0013,0x0000,-2,200,-1,0x0010,0x1690,-1,0x0011,0x0223,-2,50,-1,0x0012,0x000D,-2,50,-1,0x0013,0x1200,-1,0x0029,0x000A,-1,0x002B,0x000C,-2,50,-1,0x0020,0x0000,-1,0x0021,0x0000,-1,0x0030,0x0000,-1,0x0031,0x0506,-1,0x0032,0x0104,-1,0x0035,0x0207,-1,0x0036,0x000F,-1,0x0037,0x0306,-1,0x0038,0x0102,-1,0x0039,0x0707,-1,0x003C,0x0702,-1,0x003D,0x1604,-1,0x0050,0x0000,-1,0x0051,0x00EF,-1,0x0052,0x0000,-1,0x0053,0x013F,-1,0x0060,0xA700,-1,0x0061,0x0001,-1,0x006A,0x0000,-1,0x0080,0x0000,-1,0x0081,0x0000,-1,0x0082,0x0000,-1,0x0083,0x0000,-1,0x0084,0x0000,-1,0x0085,0x0000,-1,0x0090,0x0010,-1,0x0092,0x0600,-1,0x0007,0x0133,-3
Emulating ili9341fb
Blog post: http://lallafa.de/blog/2013/06/watterott-mi0283qt-9-display-with-generic-flexfb-driver/
modprobe fbtft_device name=flexfb gpios=reset:25,led:18
modprobe flexfb width=320 height=240 buswidth=9 init=\
-1,0x28,-2,20,-1,0xCF,0x00,0x83,0x30,-1,0xED,0x64,0x03,0x12,0x81,-1,0xE8,0x85,0x01,0x79,\
-1,0xCB,0x39,0x2c,0x00,0x34,0x02,-1,0xF7,0x20,-1,0xEA,0x00,0x00,-1,0xC0,0x26,-1,0xC1,0x11,\
-1,0xC5,0x35,0x3E,-1,0xC7,0xBE,-1,0xB1,0x00,0x1B,-1,0xB6,0x0a,0x82,0x27,0x00,-1,0xB7,0x07,\
-1,0x3A,0x55,-1,0x36,0x38,-1,0x11,-2,120,-1,0x29,-2,20,-3
Emulating hy28afb
modprobe fbtft_device name=flexfb startbyte=0x70 mode=3
modprobe flexfb width=240 height=320 regwidth=16 setaddrwin=1 init=-1,0x00E5,0x8000,-1,0x0000,0x0001,-1,0x0001,0x0100,-1,0x0002,0x0700,-1,0x0003,0x1030,-1,0x0004,0x0000,-1,0x0008,0x0202,-1,0x0009,0x0000,-1,0x000A,0x0000,-1,0x000C,0x0000,-1,0x000D,0x0000,-1,0x000F,0x0000,-1,0x0010,0x0000,-1,0x0011,0x0007,-1,0x0012,0x0000,-1,0x0013,0x0000,-2,200,-1,0x0010,0x17B0,-1,0x0011,0x0031,-2,50,-1,0x0012,0x0138,-2,50,-1,0x0013,0x1800,-1,0x0029,0x0008,-2,50,-1,0x0020,0x0000,-1,0x0021,0x0000,-1,0x0030,0x0000,-1,0x0031,0x0505,-1,0x0032,0x0004,-1,0x0035,0x0006,-1,0x0036,0x0707,-1,0x0037,0x0105,-1,0x0038,0x0002,-1,0x0039,0x0707,-1,0x003C,0x0704,-1,0x003D,0x0807,-1,0x0050,0x0000,-1,0x0051,0x00EF,-1,0x0052,0x0000,-1,0x0053,0x013F,-1,0x0060,0x2700,-1,0x0061,0x0001,-1,0x006A,0x0000,-1,0x0080,0x0000,-1,0x0081,0x0000,-1,0x0082,0x0000,-1,0x0083,0x0000,-1,0x0084,0x0000,-1,0x0085,0x0000,-1,0x0090,0x0010,-1,0x0092,0x0000,-1,0x0093,0x0003,-1,0x0095,0x0110,-1,0x0097,0x0000,-1,0x0098,0x0000,-1,0x0007,0x0173,-3
Datasheet: http://www.displaytech-us.com/sites/default/files/driver-ic-data-sheet/ILI9341_DS_V1.10_20110415.pdf
Application notes: http://focuslcd.com/wp/wp-content/uploads/2012/10/ILI9341_AN_V0.9.pdf
Use init sequence from this FBTFT driver: http://zdoom.ic.cz/raspberry/ili9225fb.c
Video: http://www.youtube.com/watch?v=UZEK9zQeTnM
modprobe flexfb width=176 height=220 regwidth=16 setaddrwin=1 init=