flexfb

Generic driver for various LCD Controllers.

Note: Will be available in the next image after 2013-04-11

This driver tries to be a solution for the many LCD Controllers available, without having to write drivers for them all.
One strength is that it is runtime configurable. Download image and start using with an "unsupported" display.

The driver supports both SPI devices: flexfb and platform devices: flexpfb. spidevices has support for both.

Parameters

• height
  Display height (required)
• width
  Display width (required)
• init
  Init sequence (required)
  Markers: -1: command begin, -2: millisecond delay, -3: end of init sequence
• setaddrwin
  Which set_addr_win() implementation to use
  0 - st7735r, hx8340
  1 - ili9320, ili9325
• buswidth
  Width of databus (default: 8)
• regwidth
  Width of controller register (default: 8)
• nobacklight
  Turn off backlight functionality.

Tested examples

Sainsmart 1.8"

modprobe spidevices name=flexfb
modprobe flexfb width=128 height=160 init=-1,0x01,-2,150,-1,0x11,-2,500,-1,0xB1,0x01,0x2C,0x2D,-1,0xB2,0x01,0x2C,0x2D,-1,0xB3,0x01,0x2C,0x2D,0x01,0x2C,0x2D,-1,0xB4,0x07,-1,0xC0,0xA2,0x02,0x84,-1,0xC1,0xC5,-1,0xC2,0x0A,0x00,-1,0xC3,0x8A,0x2A,-1,0xC4,0x8A,0xEE,-1,0xC5,0x0E,-1,0x20,-1,0x36,0xC0,-1,0x3A,0x05,-1,0xE0,0x0f,0x1a,0x0f,0x18,0x2f,0x28,0x20,0x22,0x1f,0x1b,0x23,0x37,0x00,0x07,0x02,0x10,-1,0xE1,0x0f,0x1b,0x0f,0x17,0x33,0x2c,0x29,0x2e,0x30,0x30,0x39,0x3f,0x00,0x07,0x03,0x10,-1,0x29,-2,100,-1,0x13,-2,10,-3

Adafruit 2.2"

modprobe spidevices name=flexfb
modprobe flexfb width=176 height=220 buswidth=9 init=-1,0xC1,0xFF,0x83,0x40,-1,0x11,-2,150,-1,0xCA,0x70,0x00,0xD9,-1,0xB0,0x01,0x11,-1,0xC9,0x90,0x49,0x10,0x28,0x28,0x10,0x00,0x06,-2,20,-1,0xC2,0x60,0x71,0x01,0x0E,0x05,0x02,0x09,0x31,0x0A,-1,0xC3,0x67,0x30,0x61,0x17,0x48,0x07,0x05,0x33,-2,10,-1,0xB5,0x35,0x20,0x45,-1,0xB4,0x33,0x25,0x4C,-2,10,-1,0x3A,0x05,-1,0x29,-2,10,-3

ITDB02-2.8

modprobe spidevices name=flexpfb
modprobe flexfb width=240 height=320 regwidth=16 setaddrwin=1 init=-1,0x00E3,0x3008,-1,0x00E7,0x0012,-1,0x00EF,0x1231,-1,0x0001,0x0100,-1,0x0002,0x0700,-1,0x0003,0x1030,-1,0x0004,0x0000,-1,0x0008,0x0207,-1,0x0009,0x0000,-1,0x000A,0x0000,-1,0x000C,0x0000,-1,0x000D,0x0000,-1,0x000F,0x0000,-1,0x0010,0x0000,-1,0x0011,0x0007,-1,0x0012,0x0000,-1,0x0013,0x0000,-2,200,-1,0x0010,0x1690,-1,0x0011,0x0223,-2,50,-1,0x0012,0x000D,-2,50,-1,0x0013,0x1200,-1,0x0029,0x000A,-1,0x002B,0x000C,-2,50,-1,0x0020,0x0000,-1,0x0021,0x0000,-1,0x0030,0x0000,-1,0x0031,0x0506,-1,0x0032,0x0104,-1,0x0035,0x0207,-1,0x0036,0x000F,-1,0x0037,0x0306,-1,0x0038,0x0102,-1,0x0039,0x0707,-1,0x003C,0x0702,-1,0x003D,0x1604,-1,0x0050,0x0000,-1,0x0051,0x00EF,-1,0x0052,0x0000,-1,0x0053,0x013F,-1,0x0060,0xA700,-1,0x0061,0x0001,-1,0x006A,0x0000,-1,0x0080,0x0000,-1,0x0081,0x0000,-1,0x0082,0x0000,-1,0x0083,0x0000,-1,0x0084,0x0000,-1,0x0085,0x0000,-1,0x0090,0x0010,-1,0x0092,0x0600,-1,0x0007,0x0133,-3

Not tested

ILI9320
Application notes: http://www.densitron.com/uploadedFiles/Displays/Support/ILI9320AN_V0.92.pdf
Under contruction...

modprobe flexfb width=240 height=320 regwidth=16 setaddrwin=1 init=-3