configuration-acrn.toml.in

# Copyright (c) 2017-2019 Intel Corporation
# Copyright (c) 2021 Adobe Inc.
#
# SPDX-License-Identifier: Apache-2.0
#

# XXX: WARNING: this file is auto-generated.
# XXX:
# XXX: Source file: "@CONFIG_ACRN_IN@"
# XXX: Project:
# XXX:   Name: @PROJECT_NAME@
# XXX:   Type: @PROJECT_TYPE@

[hypervisor.acrn]
path = "@ACRNPATH@"
ctlpath = "@ACRNCTLPATH@"
kernel = "@KERNELPATH_ACRN@"
image = "@IMAGEPATH@"

# rootfs filesystem type:
#   - ext4 (default)
#   - xfs
#   - erofs
rootfs_type=@DEFROOTFSTYPE@

# List of valid annotation names for the hypervisor
# Each member of the list is a regular expression, which is the base name
# of the annotation, e.g. "path" for io.katacontainers.config.hypervisor.path"
enable_annotations = @DEFENABLEANNOTATIONS@

# List of valid annotations values for the hypervisor
# Each member of the list is a path pattern as described by glob(3).
# The default if not set is empty (all annotations rejected.)
# Your distribution recommends: @ACRNVALIDHYPERVISORPATHS@
valid_hypervisor_paths = @ACRNVALIDHYPERVISORPATHS@

# List of valid annotations values for ctlpath
# The default if not set is empty (all annotations rejected.)
# Your distribution recommends: @ACRNVALIDCTLPATHS@
valid_ctlpaths = @ACRNVALIDCTLPATHS@

# Optional space-separated list of options to pass to the guest kernel.
# For example, use `kernel_params = "vsyscall=emulate"` if you are having
# trouble running pre-2.15 glibc.
#
# WARNING: - any parameter specified here will take priority over the default
# parameter value of the same name used to start the virtual machine.
# Do not set values here unless you understand the impact of doing so as you
# may stop the virtual machine from booting.
# To see the list of default parameters, enable hypervisor debug, create a
# container and look for 'default-kernel-parameters' log entries.
kernel_params = "@KERNELPARAMS@"

# Path to the firmware.
# If you want that acrn uses the default firmware leave this option empty
firmware = "@FIRMWAREPATH@"

# Default maximum number of vCPUs per SB/VM:
# unspecified or == 0             --> will be set to the actual number of physical cores or to the maximum number
#                                     of vCPUs supported by KVM if that number is exceeded
# > 0 <= number of physical cores --> will be set to the specified number
# > number of physical cores      --> will be set to the actual number of physical cores or to the maximum number
#                                     of vCPUs supported by KVM if that number is exceeded
# WARNING: Depending of the architecture, the maximum number of vCPUs supported by KVM is used when
# the actual number of physical cores is greater than it.
# WARNING: Be aware that this value impacts the virtual machine's memory footprint and CPU
# the hotplug functionality. For example, `default_maxvcpus = 240` specifies that until 240 vCPUs
# can be added to a SB/VM, but the memory footprint will be big. Another example, with
# `default_maxvcpus = 8` the memory footprint will be small, but 8 will be the maximum number of
# vCPUs supported by the SB/VM. In general, we recommend that you do not edit this variable,
# unless you know what are you doing.
default_maxvcpus = @DEFMAXVCPUS_ACRN@

# Bridges can be used to hot plug devices.
# Limitations:
# * Currently only pci bridges are supported
# * Until 30 devices per bridge can be hot plugged.
# * Until 5 PCI bridges can be cold plugged per VM.
#   This limitation could be a bug in the kernel
# Default number of bridges per SB/VM:
# unspecified or 0   --> will be set to @DEFBRIDGES@
# > 1 <= 5           --> will be set to the specified number
# > 5                --> will be set to 5
default_bridges = @DEFBRIDGES@

# Default memory size in MiB for SB/VM.
# If unspecified then it will be set @DEFMEMSZ@ MiB.
default_memory = @DEFMEMSZ@

# Block storage driver to be used for the hypervisor in case the container
# rootfs is backed by a block device. ACRN only supports virtio-blk.
block_device_driver = "@DEFBLOCKSTORAGEDRIVER_ACRN@"

# This option changes the default hypervisor and kernel parameters
# to enable debug output where available.
#
# Default false
#enable_debug = true

# Disable the customizations done in the runtime when it detects
# that it is running on top a VMM. This will result in the runtime
# behaving as it would when running on bare metal.
#
#disable_nesting_checks = true

# If host doesn't support vhost_net, set to true. Thus we won't create vhost fds for nics.
# Default false
#disable_vhost_net = true

# Path to OCI hook binaries in the *guest rootfs*.
# This does not affect host-side hooks which must instead be added to
# the OCI spec passed to the runtime.
#
# You can create a rootfs with hooks by customizing the osbuilder scripts:
# https://github.com/kata-containers/kata-containers/tree/main/tools/osbuilder
#
# Hooks must be stored in a subdirectory of guest_hook_path according to their
# hook type, i.e. "guest_hook_path/{prestart,poststart,poststop}".
# The agent will scan these directories for executable files and add them, in
# lexicographical order, to the lifecycle of the guest container.
# Hooks are executed in the runtime namespace of the guest. See the official documentation:
# https://github.com/opencontainers/runtime-spec/blob/v1.0.1/config.md#posix-platform-hooks
# Warnings will be logged if any error is encountered while scanning for hooks,
# but it will not abort container execution.
#guest_hook_path = "/usr/share/oci/hooks"

# disable applying SELinux on the VMM process (default false)
disable_selinux=@DEFDISABLESELINUX@

[agent.@PROJECT_TYPE@]
# If enabled, make the agent display debug-level messages.
# (default: disabled)
#enable_debug = true

# Enable agent tracing.
#
# If enabled, the agent will generate OpenTelemetry trace spans.
#
# Notes:
#
# - If the runtime also has tracing enabled, the agent spans will be
#   associated with the appropriate runtime parent span.
# - If enabled, the runtime will wait for the container to shutdown,
#   increasing the container shutdown time slightly.
#
# (default: disabled)
#enable_tracing = true

# Enable debug console.

# If enabled, user can connect guest OS running inside hypervisor
# through "kata-runtime exec <sandbox-id>" command

#debug_console_enabled = true

# Agent connection dialing timeout value in seconds
# (default: 45)
dial_timeout = 45

[runtime]
# If enabled, the runtime will log additional debug messages to the
# system log
# (default: disabled)
#enable_debug = true
#
# Internetworking model
# Determines how the VM should be connected to the
# the container network interface
# Options:
#
#   - bridged (Deprecated)
#     Uses a linux bridge to interconnect the container interface to
#     the VM. Works for most cases except macvlan and ipvlan.
#     ***NOTE: This feature has been deprecated with plans to remove this
#     feature in the future. Please use other network models listed below.
#
#
#   - macvtap
#     Used when the Container network interface can be bridged using
#     macvtap.
#
#   - none
#     Used when customize network. Only creates a tap device. No veth pair.
#
#   - tcfilter
#     Uses tc filter rules to redirect traffic from the network interface
#     provided by plugin to a tap interface connected to the VM.
#
internetworking_model="@DEFNETWORKMODEL_ACRN@"

# disable guest seccomp
# Determines whether container seccomp profiles are passed to the virtual
# machine and applied by the kata agent. If set to true, seccomp is not applied
# within the guest
# (default: true)
disable_guest_seccomp=@DEFDISABLEGUESTSECCOMP@

# If enabled, the runtime will create opentracing.io traces and spans.
# (See https://www.jaegertracing.io/docs/getting-started).
# (default: disabled)
#enable_tracing = true

# Set the full url to the Jaeger HTTP Thrift collector.
# The default if not set will be "http://localhost:14268/api/traces"
#jaeger_endpoint = ""

# Sets the username to be used if basic auth is required for Jaeger.
#jaeger_user = ""

# Sets the password to be used if basic auth is required for Jaeger.
#jaeger_password = ""

# If enabled, the runtime will not create a network namespace for shim and hypervisor processes.
# This option may have some potential impacts to your host. It should only be used when you know what you're doing.
# `disable_new_netns` conflicts with `internetworking_model=bridged` and `internetworking_model=macvtap`. It works only
# with `internetworking_model=none`. The tap device will be in the host network namespace and can connect to a bridge
# (like OVS) directly.
# (default: false)
#disable_new_netns = true

# if enabled, the runtime will add all the kata processes inside one dedicated cgroup.
# The container cgroups in the host are not created, just one single cgroup per sandbox.
# The runtime caller is free to restrict or collect cgroup stats of the overall Kata sandbox.
# The sandbox cgroup path is the parent cgroup of a container with the PodSandbox annotation.
# The sandbox cgroup is constrained if there is no container type annotation.
# See: https://pkg.go.dev/github.com/kata-containers/kata-containers/src/runtime/virtcontainers#ContainerType
sandbox_cgroup_only=@DEFSANDBOXCGROUPONLY@

# If enabled, the runtime will not create Kubernetes emptyDir mounts on the guest filesystem. Instead, emptyDir mounts will
# be created on the host and shared via virtio-fs. This is potentially slower, but allows sharing of files from host to guest.
disable_guest_empty_dir=@DEFDISABLEGUESTEMPTYDIR@

# Enabled experimental feature list, format: ["a", "b"].
# Experimental features are features not stable enough for production,
# they may break compatibility, and are prepared for a big version bump.
# Supported experimental features:
# (default: [])
experimental=@DEFAULTEXPFEATURES@

# If enabled, user can run pprof tools with shim v2 process through kata-monitor.
# (default: false)
# enable_pprof = true