pydatalogger.yml

sensors:

  SENSOR_DUMMY:
    enabled: true
    parameters:
      address: '/dev/dummy'

  SENSOR_BME280:
    enabled: true
    parameters:
      address: 0x77

  SENSOR_BMP180:
    enabled: true
    # Use device on I2C bus=1, address=0x77
    parameters:
      bus: 1
      address: 0x77

  SENSOR_DHT11:
    enabled: true
    parameters:
      address: 17

  SENSOR_DS18B20_SYSFS:
    enabled: true
    parameters:
      address: '28-00000736781c'

  SENSOR_DS18B20_OWFS:
    enabled: true
    parameters:
      address: '28-00000736781c'

  SENSOR_SDS011:
    enabled: true
    parameters:
      address: '/dev/ttyUSB0'

  SENSOR_HX711:
    enabled: true
    parameters:
      dout_pin: 5
      pdsck_pin: 6
      channel: 'A'
      gain: 64

  SENSOR_ABE_DELTA_SIGMA_ADC:
    # Initialize the ADC device using the default addresses.
    # Set sample rate to 18 and amplifier gain to 8.
    enabled: true
    parameters:
      address: 0x68
      address2: 0x69
      samplerate: 18
      gain: 8
      channels:
        - 1
        - 2
        - 3
        - 4