whatsnew-2.1.txt

                         What's new in Libevent 2.1
                             Nick Mathewson

0. Before we start

0.1. About this document

  This document describes the key differences between Libevent 2.0 and
  Libevent 2.1, from a user's point of view.  It's a work in progress.

  For better documentation about libevent, see the links at
  http://libevent.org/

  Libevent 2.1 would not be possible without the generous help of
  numerous volunteers.  For a list of who did what in Libevent 2.1,
  please see the ChangeLog!

  NOTE: I am very sure that I missed some thing on this list.  Caveat
  haxxor.

0.2. Where to get help

  Try looking at the other documentation too.  All of the header files
  have documentation in the doxygen format; this gets turned into nice
  HTML and linked to from the libevent.org website.

  There is a work-in-progress book with reference manual at
  http://www.wangafu.net/~nickm/libevent-book/ .

  You can ask questions on the #libevent IRC channel at irc.oftc.net or
  on the mailing list at libevent-users@freehaven.net.  The mailing list
  is subscribers-only, so you will need to subscribe before you post.

0.3. Compatibility

  Our source-compatibility policy is that correct code (that is to say,
  code that uses public interfaces of Libevent and relies only on their
  documented behavior) should have forward source compatibility: any
  such code that worked with a previous version of Libevent should work
  with this version too.

  We don't try to do binary compatibility except within stable release
  series, so binaries linked against any version of Libevent 2.0 will
  probably need to be recompiled against Libevent 2.1.1-alpha if you
  want to use it.  It is probable that we'll break binary compatibility
  again before Libevent 2.1 is stable.

1. New APIs and features

1.1. New ways to build libevent

  We now provide an --enable-gcc-hardening configure option to turn on
  GCC features designed for increased code security.

  There is also an --enable-silent-rules configure option to make
  compilation run more quietly with automake 1.11 or later.

  You no longer need to use the --enable-gcc-warnings option to turn on
  all of the GCC warnings that Libevent uses.  The only change from
  using that option now is to turn warnings into errors.

  For IDE users, files that are not supposed to be built are now
  surrounded with appropriate #ifdef lines to keep your IDE from getting
  upset.


1.2. New functions for events and the event loop

  If you're running Libevent with multiple event priorities, you might
  want to make sure that Libevent checks for new events frequently, so
  that time-consuming or numerous low-priority events don't keep it from
  checking for new high-priority events.  You can now use the
  event_config_set_max_dispatch_interval() interface to ensure that the
  loop checks for new events either every N microseconds, every M
  callbacks, or both.

  There is an EVLOOP_NO_EXIT_ON_EMPTY flag that tells event_base_loop()
  to keep looping even when there are no pending events.  (Ordinarily,
  event_base_loop() will exit as soon as no events are pending.)

  Past versions of Libevent have been annoying to use with some
  memory-leak-checking tools, because Libevent allocated some global
  singletons but provided no means to free them.  There is now a
  function, libevent_global_shutdown(), that you can use to free all
  globally held resources before exiting, so that your leak-check tools
  don't complain.  (Note: this function doesn't free non-global things
  like events, bufferevents, and so on; and it doesn't free anything
  that wouldn't otherwise get cleaned up by the operating system when
  your process exit()s.  If you aren't using a leak-checking tool, there
  is not much reason to call libevent_global_shutdown().)

  There is a new event_base_get_npriorities() function to return the
  number of priorities set in the event base.

  Libevent 2.0 added an event_new() function to construct a new struct
  event on the heap.  Unfortunately, with event_new(), there was no
  equivalent for:

         struct event ev;
         event_assign(&ev, base, fd, EV_READ, callback, &ev);

  In other words, there was no easy way for event_new() to set up an
  event so that the event itself would be its callback argument.
  Libevent 2.1 lets you do this by passing "event_self_cbarg()" as the
  callback argument:

         struct event *evp;
         evp = event_new(base, fd, EV_READ, callback,
         event_self_cbarg());

  There's also a new event_base_get_running_event() function you can
  call from within a Libevent callback to get a pointer to the current
  event.  This should never be strictly necessary, but it's sometimes
  convenient.

1.3. New debugging features

  You can now turn on debug logs at runtime using a new function,
  event_enable_debug_logging().

  There's also been some work done to try to make the debugging logs
  more generally useful.

1.4. New evbuffer functions

  In Libevent 2.0, we introduced evbuffer_add_file() to add an entire
  file's contents to an evbuffer, and then send them using sendfile() or
  mmap() as appropriate.  This API had some drawbacks, however.
  Notably, it created one mapping or fd for every instance of the same
  file added to any evbuffer.  Also, adding a file to an evbuffer could
  make that buffer unusable with SSL bufferevents, filtering
  bufferevents, and any code that tried to read the contents of the
  evbuffer.

  Libevent 2.1 adds a new evbuffer_file_segment API to solve these
  problems.  Now, you can use evbuffer_file_segment_new() to construct a
  file-segment object, and evbuffer_add_file_segment() to insert it (or
  part of it) into an evbuffer.  These segments avoid creating redundant
  maps or fds.  Better still, the code is smart enough (when the OS
  supports sendfile) to map the file when that's necessary, and use
  sendfile() otherwise.

  The evbuffer_ptr interface has been extended so that an evbuffer_ptr
  can now yield a point just after the end of the buffer.  This makes
  many algorithms simpler to implement.

  There's a new evbuffer_add_buffer() interface that you can use to add
  one buffer to another nondestructively.  When you say
  evbuffer_add_buffer_reference(outbuf, inbuf), outbuf now contains a
  reference to the contents of inbuf.

  To aid in adding data in bulk while minimizing evbuffer calls, there
  is an evbuffer_add_iovec() function.

  There's a new evbuffer_copyout_from() variant function to enable
  copying data nondestructively from the middle of a buffer.

  evbuffer_readln() now supports an EVBUFFER_EOL_NUL argument to fetch
  NUL-terminated strings from buffers.

1.5. New functions and features: bufferevents

  You can now use the bufferevent_getcb() function to find out a
  bufferevent's callbacks.  Previously, there was no supported way to do
  that.

  The largest chunk readable or writeable in a single bufferevent
  callback is no longer hardcoded; it's now configurable with
  the new functions bufferevent_set_max_single_read() and
  bufferevent_set_max_single_write().

  For consistency, OpenSSL bufferevents now make sure to always set one
  of BEV_EVENT_READING or BEV_EVENT_WRITING when invoking an event callback.

1.6. New functions and features: evdns

  The previous evdns interface used an "open a test UDP socket" trick in
  order to detect IPv6 support.  This was a hack, since it would
  sometimes badly confuse people's firewall software, even though no
  packets were sent.  The current evdns interface-detection code uses
  the appropriate OS functions to see which interfaces are configured.

1.7. New functions and features: evconnlistener

  Libevent 2.1 adds the following evconnlistener flags:

    LEV_OPT_DEFERRED_ACCEPT -- Tells the OS that it doesn't need to
    report sockets as having arrived until the initiator has sent some
    data too.  This can greatly improve performance with protocols like
    HTTP where the client always speaks first.  On operating systems
    that don't support this functionality, this option has no effect.

    LEV_OPT_DISABLED -- Creates an evconnlistener in the disabled (not
    listening) state.

  Libevent 2.1 changes the behavior of the LEV_OPT_CLOSE_ON_EXEC
  flag.  Previously, it would apply to the listener sockets, but not to
  the accepted sockets themselves.  That's almost never what you want.
  Now, it applies both to the listener and the accepted sockets.

1.8. New functions and features: evhttp

  **********************************************************************
  NOTE: The evhttp module will eventually be deprecated in favor of Mark
  Ellzey's libevhtp library.  Don't worry -- this won't happen until
  libevhtp provides every feature that evhttp does, and provides a
  compatible interface that applications can use to migrate.
  **********************************************************************

  Previously, you could only set evhttp timeouts in increments of one
  second.  Now, you can use evhttp_set_timeout_tv() and
  evhttp_connection_set_timeout_tv() to configure
  microsecond-granularity timeouts.

  There are a new pair of functions: evhttp_set_bevcb() and
  evhttp_connection_base_bufferevent_new(), that you can use to
  configure which bufferevents will be used for incoming and outgoing
  http connections respectively.  These functions, combined with SSL
  bufferevents, should enable HTTPS support.

  There's a new evhttp_foreach_bound_socket() function to iterate over
  every listener on an evhttp object.

2. Cross-platform performance improvements

2.1. Better data structures

  We replaced several users of the sys/queue.h "TAILQ" data structure
  with the "LIST" data structure.  Because this data type doesn't
  require FIFO access, it requires fewer pointer checks and
  manipulations to keep it in line.

  All previous versions of Libevent have kept every pending (added)
  event in an "eventqueue" data structure.  Starting in Libevent 2.0,
  however, this structure became redundant: every pending timeout event
  is stored in the timeout heap or in one of the common_timeout queues,
  and every pending fd or signal event is stored in an evmap.  Libevent
  2.1 removes this data structure, and thereby saves all of the code
  that we'd been using to keep it updated.

2.2. Faster activations and timeouts

  It's a common pattern in older code to use event_base_once() with a
  0-second timeout to ensure that a callback will get run 'as soon as
  possible' in the current iteration of the Libevent loop.  We optimize
  this case by calling event_active() directly, and bypassing the
  timeout pool.  (People who are using this pattern should also consider
  using event_active() themselves.)

  Libevent 2.0 would wake up a polling event loop whenever the first
  timeout in the event loop was adjusted--whether it had become earlier
  or later.  We now only notify the event loop when a change causes the
  expiration time to become _sooner_ than it would have been otherwise.

  The timeout heap code is now optimized to perform fewer comparisons
  and shifts when changing or removing a timeout.

  Instead of checking for a wall-clock time jump every time we call
  clock_gettime(), we now check only every 5 seconds.  This should save
  a huge number of gettimeofday() calls.

2.3. Microoptimizations

  Internal event list maintainance no longer use the antipattern where
  we have one function with multiple totally independent behaviors
  depending on an argument:
      #define OP1 1
      #define OP2 2
      #define OP3 3
      void func(int operation, struct event *ev) {
        switch (op) {
          ...
        }
      }
  Instead, these functions are now split into separate functions for
  each operation:
      void func_op1(struct event *ev) { ... }
      void func_op2(struct event *ev) { ... }
      void func_op3(struct event *ev) { ... }

  This produces better code generation and inlining decisions on some
  compilers, and makes the code easier to read and check.

2.4. Evbuffer performance improvements

  The EVBUFFER_EOL_CRLF line-ending type is now much faster, thanks to
  smart optimizations.

2.5. HTTP performance improvements

   o Performance tweak to evhttp_parse_request_line. (aee1a97 Mark Ellzey)
   o Add missing break to evhttp_parse_request_line (0fcc536)


3. Backend/OS-specific improvements

3.1. Linux-specific improvements

  The logic for deciding which arguements to use with epoll_ctl() is now
  a table-driven lookup, rather than the previous pile of cascading
  branches.  This should minimize epoll_ctl() calls and make the epoll
  code run a little faster on change-heavy loads.

  Libevent now takes advantage of Linux's support for enhanced APIs
  (e.g., SOCK_CLOEXEC, SOCK_NONBLOCK, accept4, pipe2) that allow us to
  simultaneously create a socket, make it nonblocking, and make it
  close-on-exec.  This should save syscalls throughout our codebase, and
  avoid race-conditions if an exec() occurs after a socket is socket is
  created but before we can make it close-on-execute on it.

3.2. Windows-specific improvements

  We now use GetSystemTimeAsFileTime to implement gettimeofday.  It's
  significantly faster and more accurate than our old ftime()-based approach.

3.3. Improvements in the solaris evport backend.

  The evport backend has been updated to use many of the infrastructure
  improvements from Libevent 2.0.  Notably, it keeps track of per-fd
  information using the evmap infrastructure, and removes a number of
  linear scans over recently-added events.  This last change makes it
  efficient to receive many more events per evport_getn() call, thereby
  reducing evport overhead in general.

3.4. OSX backend improvements

  The OSX select backend doesn't like to have more than a certain number
  of fds set unless an "unlimited select" option has been set.
  Therefore, we now set it.

4. Infrastructure improvements

4.1. Faster tests

  I've spent some time to try to make the unit tests run faster in
  Libevent 2.1.  Nearly all of this was a matter of searching slow tests
  for unreasonably long timeouts, and cutting them down to reasonably
  long delays, though on one or two cases I actually had to parallelize
  an operation or improve an algorithm.

  On my desktop, a full "make verify" run of Libevent 2.0.18-stable
  requires about 218 seconds.  Libevent 2.1.1-alpha cuts this down to
  about 78 seconds.

  Faster unit tests are great, since they let programmers test their
  changes without losing their train of thought.

4.2. Portability

  Libevent now uses large-file support internally on platforms where it
  matters.  You shouldn't need to set _LARGEFILE or OFFSET_BITS or
  anything magic before including the Libevent headers, either, since
  Libevent now sets the size of ev_off_t to the size of off_t that it
  received at compile time, not to some (possibly different) size based
  on current macro definitions when your program is building.

  We now also use the Autoconf AC_USE_SYSTEM_EXTENSIONS mechanism to
  enable per-system macros needed to enable not-on-by-default features.
  Unlike the rest of the autoconf macros, we output these to an
  internal-use-only evconfig-private.h header, since their names need to
  survive unmangled.  This lets us build correctly on more platforms,
  and avoid inconsistencies when some files define _GNU_SOURCE and
  others don't.

  Libevent now tries to detect OpenSSL via pkg-config.

4.3. Standards conformance

  Previous Libevent versions had no consistent convention for internal
  vs external identifiers, and used identifiers starting with the "_"
  character throughout the codebase.  That's no good, since the C
  standard says that identifiers beginning with _ are reserved.  I'm not
  aware of having any collisions with system identifiers, but it's best
  to fix these things before they cause trouble.

  We now avoid all use of the _identifiers in the Libevent source code.
  These changes were made *mainly* through the use of automated scripts,
  so there shouldn't be any mistakes, but you never know.

  As an exception, the names _EVENT_LOG_DEBUG, _EVENT_LOG_MSG_,
  _EVENT_LOG_WARN, and _EVENT_LOG_ERR are still exposed in event.h: they
  are now deprecated, but to support older code, they will need to stay
  around for a while.  New code should use EVENT_LOG_DEBUG,
  EVENT_LOG_MSG, EVENT_LOG_WARN, and EVENT_LOG_ERR instead.

5. Testing

  Libevent's test coverage level is more or less unchanged sine before:
  we still have over 80% line coverage in our tests on Linux and OSX.
  There are some under-tested modules, though: we need to fix those.