Skip to content

Latest commit

 

History

History
11 lines (9 loc) · 1.06 KB

frequently_asked_questions.md

File metadata and controls

11 lines (9 loc) · 1.06 KB
title nav_order
Frequently Asked Questions (FAQ)
9

Frequently Asked Questions (FAQ)

  1. Why do i get a latency above 1 ms when trying to ping the IP address assigned to a switch port from a directly connected server ?

    • This is the delay incurred by using the OpenFlow interface on-switch. The traffic destined to the controller is encapsulated in the OpenFlow PACKET_IN, destined to the tap interface created by baseboxd. This extra encapsulation and transmission over the OpenFlow channel results in a ~1.5 ms delay when pinging the switch port.

  2. Why do some packets with TTL=1 not reach my router?

  • Switches that forward packets may have a rule in the "Unicast Routing" table to route the packets to the CPU. In eBGP the packets carrying BGP messages have a TTL=1, which results in the packets being dropped when they would reach the CPU. For this reason there exists a switch control L3UcastTtl1ToCpu to enable routing TTL=1 packets to the CPU. For more information refer to SwitchControl section.