z auto align G34 not compensate[BUG] (short description)

[demetan71]

I run a SKR 1.4 Turbo with TFT35 E3 V3
Since I probe for Z G34 sequence do all what he had to do, but doesn't compensate. Just do movemnet, probe and report...

When I use endstop for Z everything work's fine....

Any idea??

[rondlh]

It's very difficult to judge the situation from the provided info, but it sounds like a problem with the flux capacitor.

[digant73]

TFT fw provides only a button on Menu->Movement->Bed Level->ABL/UBL->Z Align to send a G34 gcode to the printer. To enable this button on the TFT fw you need to set to 1 z_steppers_alignment setting on config.ini file. To enable the Z auto align on Marlin fw, on Marlin's Configuration_adv.h you need to enable Z_STEPPER_AUTO_ALIGN setting.

[demetan71]

https://github.com/digant73

I realized that I maybe post it on the wrong forum. Yes I know for the button. But it was working when I used to home with endstop. Now I probe z for homing, since that, do the move but doesn't correct anything.

And yes everything is enable in marlin firmware

[demetan71]

https://github.com/digant73

Humm... this issue was closed, but not resolved..... where can I put it??? Do I miss something??

[digant73]

it is a possible bug on Marlin so it should be reported here https://github.com/MarlinFirmware/Marlin/issues

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.