ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0xc (RTC_SW_CPU_RST),boot:0x28 (SPI_FAST_FLASH_BOOT) Saved PC:0x40379776 SPIWP:0xee mode:DIO, clock div:1 load:0x3fce3818,len:0x508 load:0x403c9700,len:0x4 load:0x403c9704,len:0xad0 load:0x403cc700,len:0x29d8 entry 0x403c9880 [ 89][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x420047b8 [ 101][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x42004784 [ 112][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x42004750 [ 123][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4200471c [ 135][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x420047b8 [ 146][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x42004784 [ 157][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x42004750 [ 169][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4200471c [ 180][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x420047b8 [ 191][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x42004784 [ 203][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x42004750 [ 214][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4200471c [ 243][V][esp32-hal-periman.c:154] perimanSetPinBus(): Pin 44 successfully set to type UART_RX (2) with bus 0x3fc9323c [ 254][V][esp32-hal-periman.c:154] perimanSetPinBus(): Pin 43 successfully set to type UART_TX (3) with bus 0x3fc9323c [ 264][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type USB_DM (45) successfully set to 0x42001f38 [ 276][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type USB_DP (46) successfully set to 0x42001f38 [ 287][V][esp32-hal-periman.c:154] perimanSetPinBus(): Pin 19 successfully set to type USB_DM (45) with bus 0x3fc95b44 [ 298][V][esp32-hal-periman.c:154] perimanSetPinBus(): Pin 20 successfully set to type USB_DP (46) with bus 0x3fc95b44 =========== Before Setup Start =========== Chip Info: ------------------------------------------ Model : ESP32-S3 Package : 0 Revision : 1 Cores : 2 Frequency : 240 MHz Embedded Flash : No Embedded PSRAM : No 2.4GHz WiFi : Yes Classic BT : No BT Low Energy : Yes IEEE 802.15.4 : No ------------------------------------------ INTERNAL Memory Info: ------------------------------------------ Total Size : 402060 B ( 392.6 KB) Free Bytes : 369096 B ( 360.4 KB) Allocated Bytes : 27932 B ( 27.3 KB) Minimum Free Bytes: 363900 B ( 355.4 KB) Largest Free Block: 335860 B ( 328.0 KB) ------------------------------------------ Flash Info: ------------------------------------------ Chip Size : 16777216 B (16 MB) Block Size : 65536 B ( 64.0 KB) Sector Size : 4096 B ( 4.0 KB) Page Size : 256 B ( 0.2 KB) Bus Speed : 80 MHz Bus Mode : QIO ------------------------------------------ Partitions Info: ------------------------------------------ nvs : addr: 0x00009000, size: 20.0 KB, type: DATA, subtype: NVS otadata : addr: 0x0000E000, size: 8.0 KB, type: DATA, subtype: OTA app0 : addr: 0x00010000, size: 1280.0 KB, type: APP, subtype: OTA_0 app1 : addr: 0x00150000, size: 1280.0 KB, type: APP, subtype: OTA_1 spiffs : addr: 0x00290000, size: 1408.0 KB, type: DATA, subtype: SPIFFS coredump : addr: 0x003F0000, size: 64.0 KB, type: DATA, subtype: COREDUMP ------------------------------------------ Software Info: ------------------------------------------ Compile Date/Time : Dec 17 2023 23:19:17 Compile Host OS : linux ESP-IDF Version : v5.1.2-185-g3662303f31-dirty Arduino Version : 3.0.0 ------------------------------------------ Board Info: ------------------------------------------ Arduino Board : ESP32S3_DEV Arduino Variant : esp32s3 Arduino FQBN : esp32:esp32:esp32s3:UploadSpeed=921600,USBMode=hwcdc,CDCOnBoot=cdc,MSCOnBoot=default,DFUOnBoot=dfu,UploadMode=default,CPUFreq=240,FlashMode=qio,FlashSize=4M,PartitionScheme=default,DebugLevel=verbose,PSRAM=disabled,LoopCore=1,EventsCore=1,EraseFlash=none,JTAGAdapter=default,ZigbeeMode=default ============ Before Setup End ============ [ 613][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type USB_DM (45) successfully set to 0x42001f38 [ 613][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type USB_DP (46) successfully set to 0x42001f38 [ 624][I][esp32-hal-periman.c:135] perimanSetPinBus(): Pin 19 already has type USB_DM (45) with bus 0x3fc95b44 [ 634][I][esp32-hal-periman.c:135] perimanSetPinBus(): Pin 20 already has type USB_DP (46) with bus 0x3fc95b44 [ 644][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42025478 [ 655][V][esp32-hal-periman.c:154] perimanSetPinBus(): Pin 4 successfully set to type GPIO (1) with bus 0x5 [ 664][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42025478 [ 675][V][esp32-hal-periman.c:154] perimanSetPinBus(): Pin 5 successfully set to type GPIO (1) with bus 0x6 [ 685][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42025478 [ 696][V][esp32-hal-periman.c:154] perimanSetPinBus(): Pin 6 successfully set to type GPIO (1) with bus 0x7 [ 706][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42025478 [ 716][V][esp32-hal-periman.c:154] perimanSetPinBus(): Pin 7 successfully set to type GPIO (1) with bus 0x8 [ 726][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42025478 [ 737][V][esp32-hal-periman.c:154] perimanSetPinBus(): Pin 15 successfully set to type GPIO (1) with bus 0x10 [ 747][V][esp32-hal-periman.c:229] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42025478 [ 758][V][esp32-hal-periman.c:154] perimanSetPinBus(): Pin 16 successfully set to type GPIO (1) with bus 0x11 =========== After Setup Start ============ INTERNAL Memory Info: ------------------------------------------ Total Size : 402060 B ( 392.6 KB) Free Bytes : 368168 B ( 359.5 KB) Allocated Bytes : 28572 B ( 27.9 KB) Minimum Free Bytes: 362976 B ( 354.5 KB) Largest Free Block: 335860 B ( 328.0 KB) ------------------------------------------ GPIO Info: ------------------------------------------ GPIO : BUS_TYPE[bus/unit][chan] -------------------------------------- 4 : GPIO 5 : GPIO 6 : GPIO 7 : GPIO 15 : GPIO 16 : GPIO 19 : USB_DM 20 : USB_DP 43 : UART_TX[0] 44 : UART_RX[0] ============ After Setup End ============= Guru Meditation Error: Core 1 panic'ed (Unhandled debug exception). Debug exception reason: Stack canary watchpoint triggered (loopTask) Core 1 register dump: PC : 0x4201893b PS : 0x00060836 A0 : 0x8201f095 A1 : 0x3fcea0e0 A2 : 0x3fcec3c0 A3 : 0x3fcea400 A4 : 0x3c0311a2 A5 : 0x3fcea570 A6 : 0x3fcea520 A7 : 0x00000004 A8 : 0x8037cfbd A9 : 0x3fcea440 A10 : 0x00060823 A11 : 0x00000000 A12 : 0x00060820 A13 : 0x00000052 A14 : 0x00000000 A15 : 0x40500000 SAR : 0x0000000a EXCCAUSE: 0x00000001 EXCVADDR: 0x00000000 LBEG : 0x400556d5 LEND : 0x400556e5 LCOUNT : 0xfffffff0 Backtrace: 0x42018938:0x3fcea0e0 0x4201f092:0x3fcea400 0x4201f0ce:0x3fcea490 0x420042c9:0x3fcea4d0 0x42012f58:0x3fcea510 0x42003aec:0x3fcea590 0x42001db9:0x3fcea600 0x42001cff:0x3fcec1b0 0x42001bde:0x3fcec1d0 0x42004d0c:0x3fcec1f0 ELF file SHA256: 64e5be01845b51d9