diff --git a/docs/examples.rst b/docs/examples.rst
index 6fa9acc..234ab1b 100644
--- a/docs/examples.rst
+++ b/docs/examples.rst
@@ -6,3 +6,12 @@ Ensure your device works with this simple test.
 .. literalinclude:: ../examples/bmp3xx_simpletest.py
     :caption: examples/bmp3xx_simpletest.py
     :linenos:
+
+DisplayIO Simpletest
+---------------------
+
+This is a simple test for boards with built-in display.
+
+.. literalinclude:: ../examples/bmp3xx_displayio_simpletest.py
+    :caption: examples/bmp3xx_displayio_simpletest.py
+    :linenos:
diff --git a/examples/bmp3xx_displayio_simpletest.py b/examples/bmp3xx_displayio_simpletest.py
new file mode 100644
index 0000000..469d12e
--- /dev/null
+++ b/examples/bmp3xx_displayio_simpletest.py
@@ -0,0 +1,45 @@
+# SPDX-FileCopyrightText: 2024 Tim Cocks for Adafruit Industries
+# SPDX-FileCopyrightText: 2024 Jose D. Montoya
+#
+# SPDX-License-Identifier: MIT
+
+# Simple demo of the BMP3XX pressure sensor using a built-in display.
+import time
+import board
+from adafruit_display_text.bitmap_label import Label
+from terminalio import FONT
+from displayio import Group
+import adafruit_bmp3xx
+
+
+# create a main_group to hold anything we want to show on the display.
+main_group = Group()
+# Initialize I2C bus and sensor.
+i2c = board.I2C()  # uses board.SCL and board.SDA
+bmp = adafruit_bmp3xx.BMP3XX_I2C(i2c)
+
+bmp.pressure_oversampling = 8
+bmp.temperature_oversampling = 2
+
+# Create a Label to show the readings. If you have a very small
+# display you may need to change to scale=1.
+display_output_label = Label(FONT, text="", scale=2)
+
+# place the label in the middle of the screen with anchored positioning
+display_output_label.anchor_point = (0, 0)
+display_output_label.anchored_position = (4, board.DISPLAY.height // 2)
+
+# add the label to the main_group
+main_group.append(display_output_label)
+
+# set the main_group as the root_group of the built-in DISPLAY
+board.DISPLAY.root_group = main_group
+
+# begin main loop
+while True:
+    # Update the label.text property to change the text on the display
+    display_output_label.text = (
+        f"Pressure: {bmp.pressure:6.4f}  Temperature: {bmp.temperature:5.2f}"
+    )
+    # wait for a bit
+    time.sleep(1)