Bro, does your LowRider3 eventually lift? Mine does, it does wheelies and bunny hops when trying to use 1/4" V-Bit 90 degree 4 flutes to carve acrylic.
Don't use this. Instead, do multiple passes with different bits. Using a thinner engraving bit to channel out material to desired depth (e.g. 60 degree). Then, use a 90 degree V Bit to carve out remaining material.
However, you might still want to use this if the machine bumps over the stock when going with fast XY feedrate. For plastics, fast XY feedrate is needed to avoid heat causing melting/gumming, which'll lead to other problems...
For more context/details, see.. https://forum.v1e.com/t/cutting-acrylic-panels-for-mp3dp/38397/52?u=azab2c
- Cut 1/4" or ~6mm Plywood (included yz-bowflex-adapter-6.5mm.e10 EstlCam file )
- Cut 1/2" or ~12.5mm plywoord (included yz-bowflex-adapter-12.5mm.e10 EstlCam file )
- 8x M5x30mm Bolts
- 8x M5mm Nylock Nuts
