- For each face of the Motor Rack, attach the bottom of the faces into each motor block with screws
- From there, assemble rest of Motor Rack
- Place the motor inside the frame
- install the tensioner with the motor
- Join the cage with plywood and secure with cage bolts
- place the 80 tooth gear and testing the alignment
- put the small chain on
- tighten the tensioner
| Step | Picture | Description |
|---|---|---|
| 1. |  |
The front brick metal bracket 2 bearings on each side of the wooden brick |
| 2. |  |
The back brick is secured by the giant bolt from the middle |
| 3. |  |
2 bearings on each side of the wooden brick Plywood chain guider piece does not have a design |
| 4. |  |
2 bearings on pully Holder block design is in the fusion Chain guider / bearing shaft is in the fusion |