OrcaSlicer 2.2.0 issue for tool change

[CorvoConV]

Good afternoon.
Reviewing the tool change code, after sending, for example, T1, the gcode back to the purge tower does not take into account the Z coordinate. This is a problem because in the tool change macros the head must be maintained at the height of the printing layer and when the head goes to the purge tower it can hit it. I've had this problem with older versions of PrusaSlicer but simply adding the Z coordinate in the gcode back to the purge tower fixed it.
This is an example of what I mean:
ORCASLICER

PRUSASLICER

Can you improve this please?
Thanks a lot.