From b9ba0f1e5976971e8bcbb1127a090af942f9eb45 Mon Sep 17 00:00:00 2001 From: Ben RdO Date: Tue, 1 Dec 2020 14:07:20 -0800 Subject: [PATCH] docs: update link to base profiles in README --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 54f89405b..c333f7e6e 100644 --- a/README.md +++ b/README.md @@ -43,7 +43,7 @@ A scenario is defined by the following objects: - Substations that change voltage levels (from high to low, or the reverse) - Transmission lines that carry power from one place to the other (between two substations, between a substation and load bus, between a generator bus and a substation, etc.) - Both, high voltage AC and DC lines are used in our model - Generator cost curve that specifies the cost as a function of power generated ($/MWh) - These are determined by fuel cost and generator efficiency -* **Time series** for renewable generators and demand - These profiles are calculated in the [PreREISE] package and the list of profiles generated can be consulted [here](https://github.com/Breakthrough-Energy/PreREISE/tree/develop/docs): +* **Time series** for renewable generators and demand - These profiles are calculated in the [PreREISE] package and the list of profiles generated can be consulted through the following links: [demand](https://github.com/Breakthrough-Energy/PreREISE/tree/develop/prereise/gather/demanddata), [hydro](https://github.com/Breakthrough-Energy/PreREISE/tree/develop/prereise/gather/hydrodata), [solar](https://github.com/Breakthrough-Energy/PreREISE/tree/develop/prereise/gather/solardata) and [wind](https://github.com/Breakthrough-Energy/PreREISE/tree/develop/prereise/gather/winddata). - Profile for the renewable generators consists of hourly power output - Load profile gives the hourly demand (MW) in various load zones, which are geographic entities such as a state or a portion of a state * **Change table** used to alter the grid and profiles. To illustrate: