scopetool is a small python program to retrieve captured data from Agilent oscilloscopes
Currently Supported Models:
- 54621A
- 54622A
- 54624A
- 54641A
- 54642A
- 54621D
- 54622D
- 54641D
- 54642D
There is no specific installation needed, however the tool requires the following Python modules
matplotlib <https://matplotlib.org/> PySerial <https://pythonhosted.org/pyserial/>
Once installed, you should be able to run the tool at the command line using:
`
usage: scopetool [-h] [-1] [-2] [--port USB_PORT] [--speed USB_SPEED]
`
For example:
`
$ scopetool -p /dev/ttyUSB0 -s 57600 -1 -2
`
The scope
And corresponding capture
