jh7110-starfive-visionfive-2.dtsi

// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
 * Copyright (C) 2022 StarFive Technology Co., Ltd.
 * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
 */

/dts-v1/;
#include "jh7110.dtsi"
#include "jh7110-pinfunc.h"
#include <dt-bindings/gpio/gpio.h>

/ {
	aliases {
		ethernet0 = &gmac0;
		ethernet1 = &gmac1;
		i2c0 = &i2c0;
		i2c2 = &i2c2;
		i2c5 = &i2c5;
		i2c6 = &i2c6;
		mmc0 = &mmc0;
		mmc1 = &mmc1;
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	cpus {
		timebase-frequency = <4000000>;
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0x0 0x40000000 0x1 0x0>;
	};

	gpio-restart {
		compatible = "gpio-restart";
		gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
		priority = <224>;
	};
};

&dvp_clk {
	clock-frequency = <74250000>;
};

&gmac0_rgmii_rxin {
	clock-frequency = <125000000>;
};

&gmac0_rmii_refin {
	clock-frequency = <50000000>;
};

&gmac1_rgmii_rxin {
	clock-frequency = <125000000>;
};

&gmac1_rmii_refin {
	clock-frequency = <50000000>;
};

&hdmitx0_pixelclk {
	clock-frequency = <297000000>;
};

&i2srx_bclk_ext {
	clock-frequency = <12288000>;
};

&i2srx_lrck_ext {
	clock-frequency = <192000>;
};

&i2stx_bclk_ext {
	clock-frequency = <12288000>;
};

&i2stx_lrck_ext {
	clock-frequency = <192000>;
};

&mclk_ext {
	clock-frequency = <12288000>;
};

&osc {
	clock-frequency = <24000000>;
};

&rtc_osc {
	clock-frequency = <32768>;
};

&tdm_ext {
	clock-frequency = <49152000>;
};

&gmac0 {
	phy-handle = <&phy0>;
	phy-mode = "rgmii-id";
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,dwmac-mdio";

		phy0: ethernet-phy@0 {
			reg = <0>;
		};
	};
};

&gmac1 {
	phy-handle = <&phy1>;
	phy-mode = "rgmii-id";
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,dwmac-mdio";

		phy1: ethernet-phy@1 {
			reg = <0>;
		};
	};
};

&i2c0 {
	clock-frequency = <100000>;
	i2c-sda-hold-time-ns = <300>;
	i2c-sda-falling-time-ns = <510>;
	i2c-scl-falling-time-ns = <510>;
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins>;
	status = "okay";
};

&i2c2 {
	clock-frequency = <100000>;
	i2c-sda-hold-time-ns = <300>;
	i2c-sda-falling-time-ns = <510>;
	i2c-scl-falling-time-ns = <510>;
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;
	status = "okay";
};

&i2c5 {
	clock-frequency = <100000>;
	i2c-sda-hold-time-ns = <300>;
	i2c-sda-falling-time-ns = <510>;
	i2c-scl-falling-time-ns = <510>;
	pinctrl-names = "default";
	pinctrl-0 = <&i2c5_pins>;
	status = "okay";

	axp15060: pmic@36 {
		compatible = "x-powers,axp15060";
		reg = <0x36>;
		interrupt-controller;
		#interrupt-cells = <1>;

		regulators {
			vcc_3v3: dcdc1 {
				regulator-boot-on;
				regulator-always-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc_3v3";
			};

			vdd_cpu: dcdc2 {
				regulator-always-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1540000>;
				regulator-name = "vdd-cpu";
			};

			emmc_vdd: aldo4 {
				regulator-boot-on;
				regulator-always-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "emmc_vdd";
			};
		};
	};
};

&i2c6 {
	clock-frequency = <100000>;
	i2c-sda-hold-time-ns = <300>;
	i2c-sda-falling-time-ns = <510>;
	i2c-scl-falling-time-ns = <510>;
	pinctrl-names = "default";
	pinctrl-0 = <&i2c6_pins>;
	status = "okay";
};

&mmc0 {
	max-frequency = <100000000>;
	bus-width = <8>;
	cap-mmc-highspeed;
	mmc-ddr-1_8v;
	mmc-hs200-1_8v;
	non-removable;
	cap-mmc-hw-reset;
	post-power-on-delay-ms = <200>;
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins>;
	vmmc-supply = <&vcc_3v3>;
	vqmmc-supply = <&emmc_vdd>;
	status = "okay";
};

&mmc1 {
	max-frequency = <100000000>;
	bus-width = <4>;
	no-sdio;
	no-mmc;
	broken-cd;
	cap-sd-highspeed;
	post-power-on-delay-ms = <200>;
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	status = "okay";
};

&qspi {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	nor_flash: flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		cdns,read-delay = <5>;
		spi-max-frequency = <12000000>;
		cdns,tshsl-ns = <1>;
		cdns,tsd2d-ns = <1>;
		cdns,tchsh-ns = <1>;
		cdns,tslch-ns = <1>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			spl@0 {
				reg = <0x0 0x80000>;
			};
			uboot-env@f0000 {
				reg = <0xf0000 0x10000>;
			};
			uboot@100000 {
				reg = <0x100000 0x400000>;
			};
			reserved-data@600000 {
				reg = <0x600000 0xa00000>;
			};
		};
	};
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_pins>;
	status = "okay";

	spi_dev0: spi@0 {
		compatible = "rohm,dh2228fv";
		reg = <0>;
		spi-max-frequency = <10000000>;
	};
};

&sysgpio {
	i2c0_pins: i2c0-0 {
		i2c-pins {
			pinmux = <GPIOMUX(57, GPOUT_LOW,
					      GPOEN_SYS_I2C0_CLK,
					      GPI_SYS_I2C0_CLK)>,
				 <GPIOMUX(58, GPOUT_LOW,
					      GPOEN_SYS_I2C0_DATA,
					      GPI_SYS_I2C0_DATA)>;
			bias-disable; /* external pull-up */
			input-enable;
			input-schmitt-enable;
		};
	};

	i2c2_pins: i2c2-0 {
		i2c-pins {
			pinmux = <GPIOMUX(3, GPOUT_LOW,
					     GPOEN_SYS_I2C2_CLK,
					     GPI_SYS_I2C2_CLK)>,
				 <GPIOMUX(2, GPOUT_LOW,
					     GPOEN_SYS_I2C2_DATA,
					     GPI_SYS_I2C2_DATA)>;
			bias-disable; /* external pull-up */
			input-enable;
			input-schmitt-enable;
		};
	};

	i2c5_pins: i2c5-0 {
		i2c-pins {
			pinmux = <GPIOMUX(19, GPOUT_LOW,
					      GPOEN_SYS_I2C5_CLK,
					      GPI_SYS_I2C5_CLK)>,
				 <GPIOMUX(20, GPOUT_LOW,
					      GPOEN_SYS_I2C5_DATA,
					      GPI_SYS_I2C5_DATA)>;
			bias-disable; /* external pull-up */
			input-enable;
			input-schmitt-enable;
		};
	};

	i2c6_pins: i2c6-0 {
		i2c-pins {
			pinmux = <GPIOMUX(16, GPOUT_LOW,
					      GPOEN_SYS_I2C6_CLK,
					      GPI_SYS_I2C6_CLK)>,
				 <GPIOMUX(17, GPOUT_LOW,
					      GPOEN_SYS_I2C6_DATA,
					      GPI_SYS_I2C6_DATA)>;
			bias-disable; /* external pull-up */
			input-enable;
			input-schmitt-enable;
		};
	};

	mmc0_pins: mmc0-0 {
		 rst-pins {
			pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
					      GPOEN_ENABLE,
					      GPI_NONE)>;
			bias-pull-up;
			drive-strength = <12>;
			input-disable;
			input-schmitt-disable;
			slew-rate = <0>;
		};

		mmc-pins {
			pinmux = <PINMUX(64, 0)>,
				 <PINMUX(65, 0)>,
				 <PINMUX(66, 0)>,
				 <PINMUX(67, 0)>,
				 <PINMUX(68, 0)>,
				 <PINMUX(69, 0)>,
				 <PINMUX(70, 0)>,
				 <PINMUX(71, 0)>,
				 <PINMUX(72, 0)>,
				 <PINMUX(73, 0)>;
			bias-pull-up;
			drive-strength = <12>;
			input-enable;
		};
	};

	mmc1_pins: mmc1-0 {
		clk-pins {
			pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
					      GPOEN_ENABLE,
					      GPI_NONE)>;
			bias-pull-up;
			drive-strength = <12>;
			input-disable;
			input-schmitt-disable;
			slew-rate = <0>;
		};

		mmc-pins {
			pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
					     GPOEN_SYS_SDIO1_CMD,
					     GPI_SYS_SDIO1_CMD)>,
				 <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
					      GPOEN_SYS_SDIO1_DATA0,
					      GPI_SYS_SDIO1_DATA0)>,
				 <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
					      GPOEN_SYS_SDIO1_DATA1,
					      GPI_SYS_SDIO1_DATA1)>,
				 <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
					     GPOEN_SYS_SDIO1_DATA2,
					     GPI_SYS_SDIO1_DATA2)>,
				 <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
					     GPOEN_SYS_SDIO1_DATA3,
					     GPI_SYS_SDIO1_DATA3)>;
			bias-pull-up;
			drive-strength = <12>;
			input-enable;
			input-schmitt-enable;
			slew-rate = <0>;
		};
	};

	spi0_pins: spi0-0 {
		mosi-pins {
			pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
					      GPOEN_ENABLE,
					      GPI_NONE)>;
			bias-disable;
			input-disable;
			input-schmitt-disable;
		};

		miso-pins {
			pinmux = <GPIOMUX(53, GPOUT_LOW,
					      GPOEN_DISABLE,
					      GPI_SYS_SPI0_RXD)>;
			bias-pull-up;
			input-enable;
			input-schmitt-enable;
		};

		sck-pins {
			pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
					      GPOEN_ENABLE,
					      GPI_SYS_SPI0_CLK)>;
			bias-disable;
			input-disable;
			input-schmitt-disable;
		};

		ss-pins {
			pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
					      GPOEN_ENABLE,
					      GPI_SYS_SPI0_FSS)>;
			bias-disable;
			input-disable;
			input-schmitt-disable;
		};
	};

	uart0_pins: uart0-0 {
		tx-pins {
			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
					     GPOEN_ENABLE,
					     GPI_NONE)>;
			bias-disable;
			drive-strength = <12>;
			input-disable;
			input-schmitt-disable;
			slew-rate = <0>;
		};

		rx-pins {
			pinmux = <GPIOMUX(6, GPOUT_LOW,
					     GPOEN_DISABLE,
					     GPI_SYS_UART0_RX)>;
			bias-disable; /* external pull-up */
			drive-strength = <2>;
			input-enable;
			input-schmitt-enable;
			slew-rate = <0>;
		};
	};
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins>;
	status = "okay";
};

&usb0 {
	dr_mode = "peripheral";
	status = "okay";
};

&U74_1 {
	cpu-supply = <&vdd_cpu>;
};

&U74_2 {
	cpu-supply = <&vdd_cpu>;
};

&U74_3 {
	cpu-supply = <&vdd_cpu>;
};

&U74_4 {
	cpu-supply = <&vdd_cpu>;
};