Installation Guide (Ubuntu)

The following guide will take you through setting up and installing HIAS Core.

Prerequisites

Before you can continue with this tutorial. Please ensure you have completed all of the following prerequisites.

The server installation can be run on an existing installation of Ubuntu, however we recommend using a fresh installation.

Hyper-V: If you would like to install your HIAS server on a Virtual Machine, you can use the Hyper-V installation guide before continuing this guide.
VirtualBox: If you would like to install your HIAS server on a Virtual Machine, you can use the VirtualBox installation guide before continuing this guide.
Ubuntu Server 20.04.3 LTS For this project, the operating system of choice is Ubuntu Server 20.04.3 LTS. To get your operating system installed you can follow the Create a bootable USB stick on Ubuntu tutorial.
Domain Name: You need to have your domain already hosted on a hosting account. Edit the DNS zone by adding an A record that points to your public IP, for this you need a static IP or dynamic DNS software that will update the IP in the DNZ Zone each time it changes. This will create a subdomain on your domain that will be used to host your HIAS server.
Port Forwarding: You need to open ports 443, 80, 389, 8883, 9001 and 15671 on your router pointing to the same ports on your server IP.

Remote User

You will create a new user for accessing your server remotely. Use the following commands to set up a new user for your machine. Follow the instructions provided and make sure you use a secure password.

sudo adduser YourUsername

Now grant sudo priveleges to the user:

usermod -aG sudo YourUsername

Now open a new terminal and login to your server using the new credentials you set up.

ssh YourNewUser@YourServerIP

SSH Access

Now let's beef up server secuirty. Use the following command to set up your public and private keys. Make sure you carry out this step on your development machine, not on your server.

Tips

Hit enter to confirm the default file.
Hit enter twice to skip the password (Optionalm, you can use a password if you like).

ssh-keygen

You should end up with a screen like this:

Generating public/private rsa key pair.
Enter file in which to save the key (/home/YourUser/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/YourUser/.ssh/id_rsa.
Your public key has been saved in /home/YourUser/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:5BYJMomxATmanduT3/d1CPKaFm+pGEIqpJJ5Z3zXCPM YourNewUser@YourServerIP
The key's randomart image is:
+---[RSA 2048]----+
|.oooo..          |
|o .o.o . .       |
|.+..    +        |
|o o    o .       |
|  .o .+ S . .    |
| =..+o = o.o . . |
|= o =oo.E .o..o .|
|.. + ..o.ooo+. . |
|        .o++.    |
+----[SHA256]-----+

Now you are going to copy your key to the server:

ssh-copy-id YourNewUser@YourServerIP

Once you enter your password for the new user account, your key will be saved on the server. Now try and login to the server again in a new terminal, you should log straight in without having to enter a password.

ssh YourNewUser@YourServerIP

Finally you will turn off password authentication for login. Use the following command to edit the ssh configuration.

sudo nano /etc/ssh/sshd_config

Change the following:

#PasswordAuthentication yes

To:

PasswordAuthentication no

Then restart ssh:

sudo systemctl restart ssh

If you are using ssh to do the above steps keep your current terminal connected. Open a new terminal, attempt to login to your server. If you can login then the above steps were successful.

The remainder of this tutorial assumes you are logged into your server. From your development machine, connect to your server using ssh or open your local terminal if working directly on your server machine.

ssh YourUser@YourServerIP

Attach Hard-Drive

Now you will attach the hard-drive to your server so that you can use it for the database and file system for your server.

Use the following command to create the hias directory which will be the core directory for your HIAS installation.

sudo mkdir /hias

IF YOU ARE NOT GOING TO USE AN EXTERNAL HDD YOU CAN SKIP TO THE Clone the repository STEP

First off, make sure you have plugged your hard-drive into the server machine, then use the following commands:

sudo fdisk -l

For me this gives the following output:

Disk /dev/loop1: 93.8 MiB, 98336768 bytes, 192064 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 93.9 MiB, 98484224 bytes, 192352 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mmcblk0: 58.2 GiB, 62537072640 bytes, 122142720 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 077E0353-99FE-4490-AEDA-040F34765A69

Device           Start       End   Sectors  Size Type
/dev/mmcblk0p1    2048   1050623   1048576  512M EFI System
/dev/mmcblk0p2 1050624   3147775   2097152    1G Linux filesystem
/dev/mmcblk0p3 3147776 122140671 118992896 56.8G Linux filesystem


Disk /dev/mmcblk0boot1: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mmcblk0boot0: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/dm_crypt-0: 56.8 GiB, 60922265600 bytes, 118988800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/ubuntu--vg-ubuntu--lv: 4 GiB, 4294967296 bytes, 8388608 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 1.4 TiB, 1500267937792 bytes, 2930210816 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 1DEAF6E4-963A-42E9-BFB9-00B3CD018497

Device     Start        End    Sectors  Size Type
/dev/sda1   2048 2930208767 2930206720  1.4T Microsoft basic data

Here you can see that my 1.5TB hard-drive partition is called /dev/sda1. Now you need to find the UUID of the partition:

sudo blkid

Should give you a similar output to:

/dev/mapper/dm_crypt-0: UUID="OLgaQg-GIKS-H7zM-U8iY-z3XQ-3JBS-0QWnk1" TYPE="LVM2_member"
/dev/mapper/ubuntu--vg-ubuntu--lv: UUID="8e379584-4ce3-4bf2-a81f-2cc5cfb919e6" TYPE="ext4"
/dev/mmcblk0p1: UUID="29BD-DE91" TYPE="vfat" PARTUUID="1555a088-82fb-4a55-af71-518011e32c8d"
/dev/mmcblk0p2: UUID="8568e49f-2bc9-4f00-ab65-40a8fe073662" TYPE="ext4" PARTUUID="bcd6fc23-5ce5-4057-bab2-1fced3066285"
/dev/mmcblk0p3: UUID="05355535-ad22-4979-98fd-13e585639c4e" TYPE="crypto_LUKS" PARTUUID="835c6449-5ad8-4993-84a1-f2f25d93eb71"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/mmcblk0: PTUUID="077e0353-99fe-4490-aeda-040f34765a69" PTTYPE="gpt"
/dev/sda1: LABEL="Data" UUID="B480DB4580EB0CD4" TYPE="ntfs" PARTLABEL="Elements" PARTUUID="07a78460-f599-4e31-a8ce-0b5b8b03811f"

If you look for my partition name, /dev/sda1, you will find the UUID. In this case: B470EB4570EB0CC4.

Now create a user group and then add the user you want to belong to this group:

sudo groupadd hias
sudo usermod -aG YourUsername

Now you need to edit /etc/fstab and add the rule to mount your hard-drive.

sudo nano /etc/fstab

And add the following line, make sure your use your own UUID.

UUID=YourUUID /hias auto nosuid,nodev,nofail,x-gvfs-show 0 0

oneAPI Installation

First you will install Intel® OneAPI basekit:

wget https://apt.repos.intel.com/intel-gpg-keys/GPG-PUB-KEY-INTEL-SW-PRODUCTS.PUB -O - | sudo apt-key add -
echo "deb https://apt.repos.intel.com/oneapi all main" | sudo tee /etc/apt/sources.list.d/oneAPI.list
sudo apt update
sudo apt install intel-basekit
sudo apt -y install cmake pkg-config build-essential
echo 'source /opt/intel/oneapi/setvars.sh' >> ~/.bashrc
source ~/.bashrc

Now you will install Intel® Opimization for Tensorflow from the OneAPI AI Analytics Toolkit:

conda create -n hias -c intel intel-aikit-tensorflow

Once the installation is complete, activate the Conda environment by running the following command:

conda activate hias

Configuration

You need to add your configuration to scripts/install.config. This configuration file will be used throughout the installation process. Update the document with all the values that have comments in below.

domain='Your domain name (without the protocol)'
ip='Your server IP address'
mysqlrootpass='A password for the root MySQL account'
mysqldbname='A name for the MySQL database'
mysqldbuser='A name for the MySQL user'
mysqldbpass='A password for the MySQL user'
mysqlphpmyuser='A name for the phpMyadmin user'
mysqlphpmypass='A password for the phpMyadmin user'
mongodbname='A name for the Mongo database'
mongodbadminuser='A name for the Mongo admin user'
mongodbadminpass='A password for the Mongo admin user'
mongodbuser='A name for the Mongo user'
mongodbpass='A password for the Mongo user'
ldapadminpass='A password for the LDAP admin user'
ldapdc1='Your subdomain'
ldapdc2='Your domain name'
ldapdc3='Your domain extension'
hiasbchuser=''
hiasbchpass='A password for the core HIAS Blockchain user'
hiasbchchain='A long random integer'
hiasbchpermissions=''
hiasbchpermissionst=''
hiasbchintegrity=''
hiasbchintegrityt=''
sambaorguser='Samba organization user'
sambaorgpass='Samba organization user password'
sambadevuser='Samba developer user'
sambadevpass='Samba developer user password'
sambapersonaluser='Samba personal user'
sambaperonalpass='Samba personal user password'
enckey='32 character encryption key (256 bit)'

Clone the repository

Clone the HIAS Core repository from the Peter Moss MedTech Research Project Github Organization.

To clone the repository and install this project, make sure you have Git installed. Now navigate to the home directory on your device using terminal/commandline, and then use the following command.

git clone https://github.com/aiial/hias-core.git

Once you have used the command above you will see a directory called HIAS in your home directory.

ls

Using the ls command in your home directory should show you the following.

  hias-core

The HIAS Core directory is your project root directory for this tutorial.

Installation

Ensuring that your environment is activated and you are in the project root, you can run the following command to install HIAS Core:

sh scripts/install.sh

UFW Firewall

First the UFW firewall will be installed. Follow any instructions provided.

Fail2Ban

Next Fail2Ban will be installed. Follow any instructions provided.

Group and Certificates Directory

Next a hiascore group will be created and a directory to store the server certificates will be created. You do not need to carry out any additional steps.

Samba

Next Samba will be installed.

When you see Press enter to see a dump of your service definitions, press enter.
When you see Creatin Samba organization user and New SMB password:, enter the value you added to install.config for sambaorgpass.
When you see Creatin Samba developers user and New SMB password:, enter the value you added to install.config for sambadevpass.
When you see Creatin Samba personal user and New SMB password:, enter the value you added to install.config for sambaperonalpass.

Nginx

Next the Nginx server will be installed and configured.

You can check the Nginx logs by using the following command:

cat /var/log/nginx/error.log

You can edit the configuration for the NGINX server using the following command:

sudo nano /etc/nginx/sites-available/default

You can reload the NGINX service using the following command:

sudo systemctl reload nginx

Apache Utils

Next Apache Utils will be installed. You do not need to carry out any additional steps.

Certbot

Next the Let's Encrypt certificate will be installed.

When asked, enter your preferred email address.
When asked, agree to the terms of service.
When asked, choose whether you are willing to share your email address.
When asked, select the domain name you would like to activate. This should match the value for domain in install.config.
Select 2 when asked to redirect insecure requests to HTTPS (443).
When the certbot cronjob file opens enter --post-hook "systemctl restart nginx && /home/YourUser/HIAS-Core/scripts/certs.sh" after certbot -q renew replacing YourUser with your user.

If the installation was carried out correctly you should now be able to access your website, but only using the secure protocol, 443, ie: https. If you visit your site you should now see the default Nginx page.

PHP

Next the PHP server will be installed and configured.

MySQL

Next the MySQL server will be installed and configured.

Make sure you use the credentials from your config file.

Hints:

Do not set up VALIDATE PASSWORD plugin
Use the value you set for mysqlrootpass in install.config for the root password.
Remove anonymous users
Root restricted to local host only if you are not logged in remotely.
Remove test database

phpMyAdmin

Next phpMyAdmin will be installed and configured.

When the GUI opens press tab and enter.
The second time the GUI opens hit enter on yes.
Use the value you set for mysqlphpmypass in install.config for the password.

LDAP

Next the LDAP server will be installed and configured.

Use the value you set for ldapadminpass in install.config for the password.
Do not omit OpenLDAP server configuration.
Use domain value from install.config for your DNS domain name.
Use ldapdc2 value from install.config for your organization name.
Use ldapadminpass value from install.config for your admin password.
If asked, use MDB as database backend.
Do not remove database when slapd is purged.
Do move old database.

MongoDB

Next the MongoDB server will be installed and configured. When the mongo client opens during installation, you need to follow these steps:

Enter db.enableFreeMonitoring() and enter note down the url your are provided.
Create an admin database and user, replacing YourAdminUser and YourAdminUserPass with the credentials from your config file.

To do this use the code below, replacing the values with your desired values:

use admin
db.createUser(
    {
        user: "YourAdminUser",
        pwd: "YourAdminUserPass",
        roles: [ "root" ]
    }
 )

You should see:

Successfully added user: { "user" : "username", "roles" : [ "root" ] }

Now create a database and user, change YourMongoDatabaseName, YourMongoDatabaseUser and YourMongoDatabasePass to the credentials from your config file.

use YourMongoDatabaseName
db.createUser(
    {
        user: "YourMongoDatabaseUser",
        pwd: "YourMongoDatabasePass",
        roles: [
            { role: "readWrite", db: "YourMongoDatabaseName" }
        ]
    }
)

Press ctrl + c to exit the mongo client.

SSL Security

Next the SSL security will be increased by updating the allowed protocols. If everything went ok you will see:

nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful

If you visit Qualys SSL Labs you should see your server has an A+ grade

MQTT Broker

Next the iotJumpWay MQTT Broker will be installed and configured.

AMQP Broker

Next the iotJumpWay AMQP Broker will be installed and configured.

HIASBCH

Next the HIAS Blockchain will be installed and configured.

You will be asked for a password, use the value you set for hiasbchpass in install.config for the password.
You will be provided the public address for your key, add this address to hiasbchuser in install.config.
You will be provided with the path to your secret key file, note this down in a safe place.
When prompted enter your public address.

During the installation the geth console will open, you need to follow the Deploy Smart Contracts With Geth instructions below. Please make sure to follow the instructions provided from the installation script carefully.

Deploy Smart Contracts With Geth

Start your miner:

miner.start(1)

At this point you will be inside Geth console and your blockchain will be online. You will need to wait for your DAG to be generated. You will see logs such as Generating DAG in progress epoch=0 percentage=42 elapsed=3m31.734s, when the percentage gets to 100% of epoch 1, your DAG is generated.

To deploy your smart contracts you will need the contents of:

/hias/hiasbch/contracts/build/permissions.abi
/hias/hiasbch/contracts/build/permissions.bin
/hias/hiasbch/contracts/build/integrity.abi
/hias/hiasbch/contracts/build/integrity.bin

First deploy the HIASBCH Permissions Smart Contract.

Replace ContentsOfPermissions.abi with the contents of /hias/hiasbch/contracts/build/permissions.abi
Replace ContentsOfPermissions.bin with the contents of /hias/hiasbch/contracts/build/permissions.bin. Ensure you leave the trailing 0x.
Replace YourHiasbchAddress with the address provided to you when you created your core blockchain account.
Replace YourHiasbchPassword with the your core blockchain account password.

  var pabi = ContentsOfPermissions.abi
  var pbin = "0xContentsOfPermissions.bin"
  var paddress = "YourHiasbchAddress"
  var ppass = "YourHiasbchPassword"
  personal.unlockAccount(paddress, ppass, 1200)
  var newContract = eth.contract(pabi)
  var deploy = {from:paddress, data:pbin, gas: 5000000 }
  var contractInstance = newContract.new(deploy, function(e, contract){
    if(!e) {
      if(!contract.address){
        console.log("Contract deployment transaction hash: " + contract.transactionHash);
      } else {
        console.log("Contract address: " + contract.address);
      }
    } else {
      console.log(e);
    }
  })

Once you have changed the values specified above, paste it into Geth console and hit enter. Keep an eye out for Contract deployment transaction hash: and Contract address:, when you see them copy them and add them to the configuration file. The value for hiasbchpermissions should hold the contract address and hiasbchpermissionst contract deployment transaction hash.

Now you need to deploy the HIASBCH Data Integrity Smart Contract.

Replace ContentsOfIntegrity.abi with the contents of /hias/hiasbch/contracts/build/integrity.abi
Replace ContentsOfIntegrity.bin with the contents of /hias/hiasbch/contracts/build/integrity.bin. Ensure you leave the trailing 0x.
Replace YourHiasbchAddress with the address provided to you when you created your core blockchain account.
Replace YourHiasbchPassword with the your core blockchain account password.

  var iabi = ContentsOfIntegrity.abi
  var ibin = "ContentsOfIntegrity.bin"
  var iaddress = "YourHiasbchAddress"
  var ipass = "YourHiasbchPassword"
  personal.unlockAccount(iaddress, ipass, 1200)
  var newContract = eth.contract(iabi)
  var deploy = {from:iaddress, data:ibin, gas: 5000000 }
  var contractInstance = newContract.new(deploy, function(e, contract){
    if(!e) {
      if(!contract.address){
        console.log("Contract deployment transaction hash: " + contract.transactionHash);
      } else {
        console.log("Contract address: " + contract.address);
      }
    } else {
      console.log(e);
    }
  })

Keep an eye out for Contract deployment transaction hash: and Contract address:, when you see them copy them and add them to the configuration file. The value for hiasbchintegrity should hold the contract address and hiasbchintegrityt contract deployment transaction hash.

Your Smart Contracts are now deployed and you can stop mining and exit geth:

miner.stop()
exit

You now need to log directly into your HIAS Core server, start HIASBCH and start mining. Ensuring you are in the HIAS-Core directory, use the following command to start HIASBCH:

sh components/hiasbch/scripts/startup.sh

You will now be in Geth console, use the following command to start your HIASBCH miner for the final time replacing NumberOfThreads with the amount of threads you want to use:

miner.start(NumberOfThreads)

This needs to be running at all times which is why you logged directly into your HIAS Core device. If you do not have your Blockchain running, you will not be able to log in to the HIAS UI and other core components will not be able to function. Now you can go back to your remote terminal to continue the HIAS Core installation.

HIASCDI

Now HIASCDI will be installed.

HIASHDI

Now HIASHDI will be installed.

Finalize the Installation

Now you need to finalize the installation by visiting the HIAS Core UI and completing the installation form. You can access the HIASCORE UI by visting your subdomain, ie: http://hias.yourdomain.com.

RECAPTCHA

You need a Google reCAPTCHA V2 (I'm not a robot) API key to use the HIAS UI. You can get one for free at https://www.google.com/recaptcha/admin/create.

IPINFO

You need an IPINFO API key to use the HIAS UI. You can get one for free at https://ipinfo.io/.

Google Maps

You need a Google Maps API key to use the HIAS UI. You can get one for free at https://developers.google.com/maps/documentation/javascript/get-api-key.

LDAP Check

Before you continue make sure that your LDAP server is running correctly. In terminal enter the following command:

ldapwhoami -H ldap://YourSubdomain.YourDomain.YourExtension -x -ZZ

If LDAP is working correctly using SSL you should see anoymous. If you do not see this, you will need to configure your LDAP server.

Make sure HIASBCH is running and you have a minor running.

Once you have completed the installation finalization you will be provided with the credentials you need to log into HIAS UI and configure HIASBCH, HIASCDI and HIASHDI.

HIASCDI Configuration

HIASCDI needs to be running for you to be able to login. You need to edit the components/hiascdi/configuration/credentials.json file manually and add your HIASCDI credentials.

iotJumpWay
- host = domain value from install.config
- location = HIAS Location
- zone = HIAS Zone
- un = HIASCDI User
- up = HIASCDI Password
- entity = HIASCDI Public Key
server
- host = domain value from install.config
- ip = ip value from install.config
hiascdi
- name = HIASCDI
mongodb
- db = mongodbname value from install.config
- un = mongodbuser value from install.config
- up = mongodbpass value from install.config

{
   "iotJumpWay":{
      "host":"",
      "port":0,
      "location":"",
      "zone":"",
      "entity":"",
      "name":"",
      "un":"",
      "up":"",
      "ipinfo":""
   },
   "server":{
      "host":"",
      "ip":"",
      "port":3524
   },
   "hiascdi":{
      "name":"",
      "version":"v1",
      "endpoint":"hiascdi/v1"
   },
   "mongodb":{
      "host":"localhost",
      "db":"",
      "un":"",
      "up":""
   }
}

HIASCDI Service

Now you need to create and start the HIASCDI service. You can do this by running the following command:

sh components/hiascdi/scripts/service.sh

To start the service run the following command:

sudo systemctl start HIASCDI.service

And finally to check the service status run the following command:

sudo systemctl status HIASCDI.service

You should see similar to the following:

● HIASCDI.service - HIASCDI service
     Loaded: loaded (/lib/systemd/system/HIASCDI.service; enabled; vendor preset: enabled)
     Active: active (running) since Thu 2021-09-09 23:38:58 UTC; 2s ago
   Main PID: 151939 (run.sh)
      Tasks: 2 (limit: 28158)
     Memory: 63.5M
     CGroup: /system.slice/HIASCDI.service
             ├─151939 /bin/bash /home/YourUser/HIAS-Core/components/hiascdi/scripts/run.sh
             └─151940 /home/YourUser/.conda/envs/YourUser/bin/python3 /home/YourUser/HIAS-Core/components/hiashdi/hiashdi.py

HIASHDI Configuration

You can now login to the HIAS UI to download the configuration file for HIASHDI. In HIAS UI navigate to HIASHDI -> Entity and click on the HIASHDI Configuration button. Once the file explorer opens, navigate to components/hiashdi/configuration/ and save the file as crendentials.json.

HIASHDI Service

Now you need to create and start the HIASHDI service. You can do this by running the following command:

sh components/hiashdi/scripts/service.sh

To start the service run the following command:

sudo systemctl start HIASHDI.service

And finally to check the service status run the following command:

sudo systemctl status HIASHDI.service

You should see similar to the following:

● HIASHDI.service - HIASHDI service
     Loaded: loaded (/lib/systemd/system/HIASHDI.service; enabled; vendor preset: enabled)
     Active: active (running) since Fri 2021-09-10 00:49:18 UTC; 763ms ago
   Main PID: 161249 (run.sh)
      Tasks: 2 (limit: 28158)
     Memory: 19.1M
     CGroup: /system.slice/HIASHDI.service
             ├─161249 /bin/bash /home/hias/HIAS-Core/components/hiashdi/scripts/run.sh
             └─161250 /home/hias/.conda/envs/hias/bin/python3 /home/hias/HIAS-Core/components/hiashdi/hiashdi.py

HIASBCH Configuration

In HIAS UI navigate to HIASBCH -> Entity and click on the HIASBCH Configuration button. Once the file explorer opens, navigate to components/hiasbch/configuration/ and save the file as crendentials.json.

You also need to edit the components/hiasbch/configuration/config.json file and add HIASBCH Private Key to agent -> proxy -> up.

HIASBCH Service

Now you need to create and start the HIASBCH service. You can do this by running the following command:

sh components/hiasbch/scripts/service.sh

To start the service run the following command:

sudo systemctl start HIASBCH.service

And finally to check the service status run the following command:

sudo systemctl status HIASBCH.service

You should see similar to the following:

● HIASBCH.service - HIASBCH service
     Loaded: loaded (/lib/systemd/system/HIASBCH.service; enabled; vendor preset: enabled)
     Active: active (running) since Fri 2021-09-10 00:52:21 UTC; 2s ago
   Main PID: 162029 (component.sh)
      Tasks: 2 (limit: 28158)
     Memory: 14.5M
     CGroup: /system.slice/HIASBCH.service
             ├─162029 /bin/bash /home/hias/HIAS-Core/components/hiasbch/scripts/component.sh
             └─162030 /home/hias/.conda/envs/hias/bin/python3 /home/hias/HIAS-Core/components/hiasbch/hiasbch.py

Continue

Congratulations! Your HIAS Core installation is complete and you are now ready to continue to the Ubuntu usage guide.

Contributing

The Asociación de Investigacion en Inteligencia Artificial Para la Leucemia Peter Moss encourages and welcomes code contributions, bug fixes and enhancements from the Github community.

Ways to contribute

The following are ways that you can contribute to this project:

Bug Report
Feature Request
Feature Proposal
Report Vulnerabillity

Please read the CONTRIBUTING document for a full guide to forking our repositories and submitting your pull requests. You will find information about our code of conduct on the Code of Conduct page.

You can also join in with, or create, a discussion in our Github Discussions area.

Contributors

All contributors to this project are listed below.

Adam Milton-Barker - Asociación de Investigacion en Inteligencia Artificial Para la Leucemia Peter Moss President/Founder & Lead Developer, Sabadell, Spain

Versioning

We use SemVer for versioning.

License

This project is licensed under the MIT License - see the LICENSE file for details.

Bugs/Issues

We use the repo issues to track bugs and general requests related to using this project. See CONTRIBUTING for more info on how to submit bugs, feature requests and proposals.

Files

ubuntu.md

Latest commit

History

ubuntu.md

File metadata and controls

Installation Guide (Ubuntu)

Prerequisites

Remote User

SSH Access

Tips

Attach Hard-Drive

oneAPI Installation

Configuration

Clone the repository

Installation

UFW Firewall

Fail2Ban

Group and Certificates Directory

Samba

Nginx

Apache Utils

Certbot

PHP

MySQL

phpMyAdmin

LDAP

MongoDB

SSL Security

MQTT Broker

AMQP Broker

HIASBCH

Deploy Smart Contracts With Geth

HIASCDI

HIASHDI

Finalize the Installation

RECAPTCHA

IPINFO

Google Maps

LDAP Check

HIASCDI Configuration

HIASCDI Service

HIASHDI Configuration

HIASHDI Service

HIASBCH Configuration

HIASBCH Service

Continue

Contributing

Ways to contribute

Contributors

Versioning

License

Bugs/Issues