c128-mmu-exp.rules

(rules PCB c128-mmu-exp
  (snap_angle 
    fortyfive_degree
  )
  (autoroute_settings
    (fanout on)
    (autoroute on)
    (postroute on)
    (vias on)
    (via_costs 5)
    (plane_via_costs 5)
    (start_ripup_costs 100)
    (start_pass_no 1568)
    (layer_rule F.Cu
      (active on)
      (preferred_direction vertical)
      (preferred_direction_trace_costs 1.0)
      (against_preferred_direction_trace_costs 2.4)
    )
    (layer_rule B.Cu
      (active on)
      (preferred_direction horizontal)
      (preferred_direction_trace_costs 1.0)
      (against_preferred_direction_trace_costs 1.7)
    )
  )
  (rule
    (width 250.0)
    (clear 200.2)
    (clear 125.0 (type smd_to_turn_gap))
    (clear 50.0 (type smd_smd))
  )
  (padstack "Via[0-1]_800:400_um"
    (shape
      (circle F.Cu 800.0 0.0 0.0)
    )
    (shape
      (circle B.Cu 800.0 0.0 0.0)
    )
    (attach off)
  )
  (via 
    "Via[0-1]_800:400_um" "Via[0-1]_800:400_um" default
  )
  (via 
    "Via[0-1]_800:400_um-kicad_default" "Via[0-1]_800:400_um" "kicad_default"
  )
  (via_rule
    default "Via[0-1]_800:400_um"
  )
  (via_rule
    "kicad_default" "Via[0-1]_800:400_um-kicad_default"
  )
  (class default
    /~{RESET} "unconnected-(IC5-Pad3)" "unconnected-(IC5-Pad4)" "unconnected-(IC5-Pad5)" "unconnected-(IC5-Pad6)" "unconnected-(IC5-Pad7)" "unconnected-(IC5-Pad8)" "unconnected-(IC5-Pad9)"
    "unconnected-(IC5-Pad10)" "unconnected-(IC5-Pad13)" "unconnected-(IC5-Pad14)" "unconnected-(IC5-Pad15)" /AEC /MUX /A0 /A1
    /A2 /A3 /A5{slash}A4 /A7{slash}A6 /A8 /A9 /A10 /A11
    /A12 /A13 /A14 /A15 /R{slash}~{W} "/PHI_{IN}" /D0 /D1
    /D2 /D3 /D4 /D5 /D6 /D7 /~{Z80EN} /~{FSDIR}
    /~{GAME} /~{EXROM} /MS3 /40{slash}~{80} "/D0_{IC5}" "/D6_{IC5}" /~{RAMCAS2} /~{RAMCAS3}
    "/~{RAMCAS1}_{IN}" "/~{RAMCAS0}_{IN}" "/~{RAMCAS1}_{OUT}" "/~{RAMCAS0}_{OUT}" /TA15 /TA14 /TA13 /TA12
    /TA11 /TA10 /TA9 /TA8 /~{CAS1} /~{CAS0} /MS2,~{IOSEL} /MS1
    /MS0 VCC GND "/~{CAS0_{NEW}}" "/~{CAS1_{NEW}}" "unconnected-(IC1-Pad20)" "unconnected-(IC1-Pad21)" "unconnected-(IC1-Pad22)"
    "unconnected-(IC1-Pad23)" "Net-(IC1-Pad18)" "Net-(IC1-Pad19)"
    (clearance_class default)
    (via_rule default)
    (rule
      (width 250.0)
    )
    (circuit 
      (use_layer F.Cu B.Cu)
    )
  )
  (class "kicad_default"
    (clearance_class "kicad_default")
    (via_rule kicad_default)
    (rule
      (width 250.0)
    )
    (circuit 
      (use_layer F.Cu B.Cu)
    )
  )
)