WiFiUdpNtpClient.ino

/****************************************************************************************************************************
  WiFiUDPNTPClient.ino - Simple Arduino web server sample for SAMD21 running WiFiNINA shield
  For any WiFi shields, such as WiFiNINA W101, W102, W13x, or custom, such as ESP8266/ESP32-AT, Ethernet, etc

  WiFiWebServer is a library for the ESP32-based WiFi shields to run WebServer
  Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases
  Based on  and modified from Arduino WiFiNINA library https://www.arduino.cc/en/Reference/WiFiNINA
  Built by Khoi Hoang https://github.com/khoih-prog/WiFiWebServer
  Licensed under MIT license

  Udp NTP Client

  Get the time from a Network Time Protocol (NTP) time server
  Demonstrates use of UDP sendPacket and ReceivePacket
  For more on NTP time servers and the messages needed to communicate with them,
  see http://en.wikipedia.org/wiki/Network_Time_Protocol

  created 4 Sep 2010
  by Michael Margolis
  modified 9 Apr 2012
  by Tom Igoe
 ***************************************************************************************************************************************/
#include "defines.h"

int status = WL_IDLE_STATUS;     // the Wifi radio's status
int keyIndex = 0;            // your network key Index number (needed only for WEP)

unsigned int localPort = 2390;      // local port to listen for UDP packets

IPAddress timeServer(129, 6, 15, 28); // time.nist.gov NTP server

const int NTP_PACKET_SIZE = 48; // NTP time stamp is in the first 48 bytes of the message

byte packetBuffer[ NTP_PACKET_SIZE]; //buffer to hold incoming and outgoing packets

// A UDP instance to let us send and receive packets over UDP
WiFiUDP Udp;

void printWifiStatus()
{
  // print the SSID of the network you're attached to:
  // you're connected now, so print out the data
  Serial.print(F("You're connected to the network, IP = "));
  Serial.println(WiFi.localIP());

  Serial.print(F("SSID: "));
  Serial.print(WiFi.SSID());

  // print the received signal strength:
  long rssi = WiFi.RSSI();
  Serial.print(F(", Signal strength (RSSI):"));
  Serial.print(rssi);
  Serial.println(F(" dBm"));
}

void setup()
{
  Serial.begin(115200);

  while (!Serial && millis() < 5000);

  Serial.print(F("\nStarting WiFiUdpNTPClient on "));
  Serial.print(BOARD_NAME);
  Serial.print(F(" with "));
  Serial.println(SHIELD_TYPE);
  Serial.println(WIFI_WEBSERVER_VERSION);

#if WIFI_USING_ESP_AT

  // initialize serial for ESP module
  EspSerial.begin(115200);
  // initialize ESP module
  WiFi.init(&EspSerial);

  Serial.println(F("WiFi shield init done"));

#endif

#if !(ESP32 || ESP8266)

  // check for the presence of the shield
#if USE_WIFI_NINA

  if (WiFi.status() == WL_NO_MODULE)
#else
  if (WiFi.status() == WL_NO_SHIELD)
#endif
  {
    Serial.println(F("WiFi shield not present"));

    // don't continue
    while (true);
  }

#if USE_WIFI_NINA
  String fv = WiFi.firmwareVersion();

  if (fv < WIFI_FIRMWARE_LATEST_VERSION)
  {
    Serial.println(F("Please upgrade the firmware"));
  }

#endif

#endif

  Serial.print(F("Connecting to SSID: "));
  Serial.println(ssid);

  status = WiFi.begin(ssid, pass);

  delay(1000);

  // attempt to connect to WiFi network
  while ( status != WL_CONNECTED)
  {
    delay(500);

    // Connect to WPA/WPA2 network
    status = WiFi.status();
  }

  printWifiStatus();

  Serial.println(F("\nStarting connection to server..."));
  // if you get a connection, report back via serial:
  Udp.begin(localPort);

  Serial.print(F("Listening on port "));
  Serial.println(localPort);
}

void loop()
{
  sendNTPpacket(timeServer); // send an NTP packet to a time server
  // wait to see if a reply is available
  delay(1000);

  if (Udp.parsePacket())
  {
    Serial.println(F("packet received"));
    // We've received a packet, read the data from it
    Udp.read(packetBuffer, NTP_PACKET_SIZE); // read the packet into the buffer

    //the timestamp starts at byte 40 of the received packet and is four bytes,
    // or two words, long. First, esxtract the two words:

    unsigned long highWord = word(packetBuffer[40], packetBuffer[41]);
    unsigned long lowWord = word(packetBuffer[42], packetBuffer[43]);
    // combine the four bytes (two words) into a long integer
    // this is NTP time (seconds since Jan 1 1900):
    unsigned long secsSince1900 = highWord << 16 | lowWord;

    Serial.print(F("Seconds since Jan 1 1900 = "));
    Serial.println(secsSince1900);

    // now convert NTP time into everyday time:
    Serial.print(F("Unix time = "));
    // Unix time starts on Jan 1 1970. In seconds, that's 2208988800:
    const unsigned long seventyYears = 2208988800UL;
    // subtract seventy years:
    unsigned long epoch = secsSince1900 - seventyYears;
    // print Unix time:
    Serial.println(epoch);

    // print the hour, minute and second:
    Serial.print(F("The UTC time is "));       // UTC is the time at Greenwich Meridian (GMT)
    Serial.print((epoch  % 86400L) / 3600); // print the hour (86400 equals secs per day)
    Serial.print(':');

    if (((epoch % 3600) / 60) < 10)
    {
      // In the first 10 minutes of each hour, we'll want a leading '0'
      Serial.print('0');
    }

    Serial.print((epoch  % 3600) / 60); // print the minute (3600 equals secs per minute)
    Serial.print(':');

    if ((epoch % 60) < 10)
    {
      // In the first 10 seconds of each minute, we'll want a leading '0'
      Serial.print('0');
    }

    Serial.println(epoch % 60); // print the second
  }

  // wait ten seconds before asking for the time again
  delay(10000);
}

// send an NTP request to the time server at the given address
void sendNTPpacket(IPAddress& address)
{
  // set all bytes in the buffer to 0
  memset(packetBuffer, 0, NTP_PACKET_SIZE);

  // Initialize values needed to form NTP request
  // (see URL above for details on the packets)
  packetBuffer[0] = 0b11100011;   // LI, Version, Mode
  packetBuffer[1] = 0;     // Stratum, or type of clock
  packetBuffer[2] = 6;     // Polling Interval
  packetBuffer[3] = 0xEC;  // Peer Clock Precision
  // 8 bytes of zero for Root Delay & Root Dispersion
  packetBuffer[12]  = 49;
  packetBuffer[13]  = 0x4E;
  packetBuffer[14]  = 49;
  packetBuffer[15]  = 52;

  // all NTP fields have been given values, now
  // you can send a packet requesting a timestamp:
  Udp.beginPacket(address, 123); //NTP requests are to port 123
  //Serial.println("4");
  Udp.write(packetBuffer, NTP_PACKET_SIZE);
  Udp.endPacket();
}